1.    04 May 2016 #1
    Join Date : Apr 2016
    Posts : 7

    Where would I put GRUB for a dual boot?

    Yes, I know this question belongs in the kali linux forum. Here it is there:
    This forum is just way more helpful.
    I am trying to do a dual boot on windows 10 with a Gateway NE56R49U laptop.
    My partitions are in the following picture: [ ext4 is where Kali is going]

    Which partition do I install GRUB to?
    ie: (/dev/sda)

    Do I have to do anything to get it to boot correctly since linux requires Legacy Bios and Windows requires UEFI? If so, what? If I wanted to install Ubuntu, should I do that first and then install Kali? Would that make this easier for me?

    I appreciate all the help I can get.
      My System SpecsSystem Spec

  2.    05 May 2016 #2

    It depends which bootloader you want to use. Personally, I use Grub, specifically Burg - this is what it looks like:

    Click image for larger version. 

Name:	Screenshot from 2016-05-05 18:33:01.png 
Views:	38 
Size:	127.0 KB 
ID:	78319

    I have Mint and Windows on my SSD (dev/sda) - which has Grub in that MBR.

    Recently I messed with the partitions on my second HDD (dev/sdb) and lost Windows boot - Grub's osprober found windows OK but windows still would not boot
    Macruim Reflect's "fix Windows boot" only managed to overwrite Grub, but the boot error persisted.
    The way I fixed it was re-installing Grub from Live, then running diskpart from the Win install media to get the system and windows drive letters - ran chkdsk /f /r on both those - came out clean - what fixed it was bcdboot [windows drive letter]:/windows.

    Just relaying my experience as something to bear in mind when setting yours up.
      My System SpecsSystem Spec

  3.    05 May 2016 #3
    Join Date : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3

    Quote Originally Posted by Superfly View Post
    It depends which bootloader you want to use.
    And which OS you consider primary, I suppose.

    I took the non-conventional approach.
    This is on a MBR / BIOS machine
    - Win8.1 primary, Win10 as 2nd OS, Linux Mint as 3rd OS

    I GParted two separate partitions (ext4 & linux-swap) before installing Linux Mint
    I had to tell the installation to use the ext4 part (it was flagged "do not use") - set it to use ext4 journalling
    I selected the ext4 part for the install and set the mount point as / on that part
    (be careful - the install seems to want to use to sda. just change it to your ext4 sda ... sda6 in your pic)

    Make sure to remove the the Boot flag from the ext4 part if present
    I used unallocated space in the extended partition for both Linux parts (as logical parts)

    I don't see a linux-swap part in your pic.
    I'm not certain, but suggest that you create a small part in GParted with a type linux-swap
    I used 1024 and it seems fine

    Then you have to tell Bootmgr about Grub- I used EasyBCD
    Pick the Linux OS tab
    Point to the ext4 part

    The advantage?
    Each OS leaves the other boot alone - sure you might have to reconfigure Bootmgr to know about Grub after an update from MS, but you should always be able to boot to Windows.

    Superfly's post below led me to this: Dual boot Windows 7 and Linux/UNIX (also MBR / BIOS information.
    Unix BSD descendants need a primary partition. Linux descendants can be installed to logical partitions.
    Last edited by Slartybart; 06 May 2016 at 15:09.
      My System SpecsSystem Spec

  4.    06 May 2016 #4

    Thanx Bill,

    The other thing is... for adding Linux boot to the Windows Bootmgr in UEFI, try BootNext tool - boot any Linux or Windows from Windows 8.1/7/Vista - I don't think there is a need for legacy mode.
      My System SpecsSystem Spec

  5.    06 May 2016 #5
    Join Date : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3

    Thank you Superfly,

    I wasn't sure about UEFI ... I added an MBR disclaimer in my post.

    Quote Originally Posted by Superfly View Post
    I don't think there is a need for legacy mode.
    You're talking about legacy mode for Linux, yes?
    I agree.
    Last edited by Slartybart; 06 May 2016 at 15:12.
      My System SpecsSystem Spec


Similar Threads
Thread Forum
Solved Reinstalling Windows 7 on 7/10 dual boot breaks dual boot
I installed the 10 tech preview along side my win 7 ultimate, I reinstalled, the Windows 7 side of the HDD because after however many years the OS had a LOT of clutter, and even though windows update was a nightmare I finally got all the updates...
Installation and Setup
Solved wrong drive letter in msconfig / boot in dual boot system
http://www.tenforums.com/attachment.php?attachmentid=61079&stc=1Hi guys in my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 ...
Installation and Setup
Ubuntu Boot option still available in UEFI BIOS after Dual Boot
Recently I played around with dual booting Linux Mint on my system. I decided that I would delete it for the present as I have other things to focus on. However, after deleting partitions and fixing my MBR to only boot windows my UEFI BIOS still...
General Support
What is my upgrade path from dual boot back to single boot
My laptop has dual boot - Windows 7 and Windows 10. My Win7 environment is my main working environment with lots of programs installed and important files. I installed the Win10 environnment just to play around with 10 during the technical...
Installation and Setup
Convert dual boot install to normal boot
After several weeks of testing I'm ready to go full on Windows 10 and want to get rid of Windows 7 but I have some partitioning issues I want to clean up. I currently have Windows 7 on drive 0 (360 GB) and Windows 10 on drive 1 (500 GB). Both are...
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 07:06.
Find Us
Twitter Facebook Google+

Windows 10 Forums