1.    20 Feb 2016 #1
    Join Date : Feb 2016
    Hampton, NH
    Posts : 15
    Windows 7 Home Premium 64bit Going to Win 10

    Possible upgrade problem because of location of System Reserved part?

    I want to to an 'upgrade' from Win 7 to Win 10, but I messed up when installing Win 7 - my "system reserved" partition ended up on a non-system drive (see attached). I don't want to carry over this mistake to Win 10... (plus the Win 10 upgrade says to disconnect all non-system disks -- something I guess I should have done when installing Win 7)

    What is the best way to resolve this? Can I fix this in Win 7 then upgrade? If so, how?

    Attached Thumbnails Attached Thumbnails Win7 Disk Setup.jpg  
      My System SpecsSystem Spec

  2.    20 Feb 2016 #2
    Join Date : Nov 2015
    Posts : 1,648
    64bit Win 10 Pro ver 1607 Build 14393.105


    Yes it would be worth making changes before you upgrade. The System Reserved partition holds the Boot Manager code and the Boot Configuration Database so if you delete it you won't be able to boot. The following tutorial from the seven forums shows the correct way to delete it and then carry out a startup repair to ensure your system will be able to boot afterwards by adding a new boot loader and BCD to the Windows partition. Make sure you have the necessary W7 installation disk or system repair disk. Obviously you will have to adapt the instructions to match your disk structure and location of your System Reserved partition.

    Windows 7: System Reserved Partition - Delete
      My System SpecsSystem Spec

  3.    20 Feb 2016 #3
    Join Date : Jul 2015
    Posts : 5,899
    Windows 10 Pro

    This is what I would do, you'll need a blank DVD or USB flash drive (8 gb):

    1. Make a bootable USB/DVD of Kyhi's recovery tools:
    Windows 10 Recovery Tools - Bootable Rescue Disk - Windows 10 Forums

    2. Boot from it. Use MiniTool Partition Wizard to copy the system reserved partition on Disk 1 to the unallocated space at the end of Disk 2. Make sure that the new location for the System Reserved partition on Disk 2 gets marked as active. Make sure you actually click the apply button.

    3. Shutdown. Disconnect disks 0 and 1. While I was at it, I would move Disk 2 to the first SATA port on the motherboard so that it becomes Disk 0. Restart the computer with only the hard drive containing Windows and the new System Reserved partition.

    4. Once booted into Windows, attempt to run the upgrade to Windows 10. If it fails it is likely the System Reserved partition is too small.

    5. If it fails, reboot into Kyhi's recovery disc, shrink C: drive partition by 100 MB not GB!. Add the 100 MB to the system reserved partition, click apply.

    6. Reboot and try the upgrade again.

    An alternative:

    Do steps 1 and 3 first except you will probably get an error when you try to boot the computer. Boot Kyhi's recovery disc and run Macrium Reflect Free. Select the fix Windows startup utility under the restore menu to restore booting. Then reboot and try the upgrade.
      My System SpecsSystem Spec


Similar Threads
Thread Forum
System Reserved?
Hi All Have been trying to find out, in Disc management why I have one HDD showing it System Reserved. I think it was my old system drive and may have had Win 7 on. Many Thanks for any help Alan ...
General Support
Need to move/fix location of System Reserved partition
I am trying to make space on an empty partition as a temp backup before I install a fresh copy of 8.1 to upgrade to 10. I'm using Mini Tools Partition Wizard 9 Free Edition. What I have looking at the partitions are, a C partition (700 gigs...
Installation and Setup
Solved Win 10 Upgrade Error: Couldn't Update the System Reserved Partition
I have a Vaio laptop and migrated my factory Windows 7 install to an SSD about a year ago, which apparently left me with no system reserved partition. I used these instructions to create a new system reserved partition, but I'm still getting the...
Installation and Setup
Solved No System Reserved Partition On My SSD
I have an SSD with WIN7 installed. It has no System Reserved Partition (SRP) and thus no boot files on that nonexistent partition. I've read here that individuals with a SRP of only 100mb have had issues installing WIN 10 and that those issues...
Installation and Setup
"We couldn't update the system reserved partition" win10 upgrade error
Hi, I am running win 8.1 and I want to upgrade to win 10. It show me this message: 27831 This is my HD: 27832
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:49.
Find Us
Twitter Facebook Google+

Windows 10 Forums