1.    29 Dec 2015 #1
    Join Date : Dec 2015
    Posts : 2
    windows 7

    Dual Boot, Error Code:0xc000000f

    Firstly may I apologise if I have submitted my problem in the incorrect Forum, my symptoms seem to spread across a couple of areas.
    I am operating a 1 TB drive with Windows 10 and 7 in a Dual Boot configuration on my desktop PC, the win 10 is an on-line downloaded upgrade from win 8.1, which was also an on-line download. All as been running well since win 10 was launched. I use win 10 for my Admin and Image Storage and manipulation and Win 7 for Flight Sim.
    Yesterday afternoon I restarted my PC from Win 7, the PC rebooted to the Win 10 sign on screen but it was in a frozen state, there was nothing I could do so I pressed the PC reset button. It did not reboot to the Dual Boot screen, but presented me with a Blue screen headed 'Your PC needs to be repaired' followed by reference to:
    File:\windows\system32\winload.exe. , and then the error code indicated in the Thread Title above, and the following.
    You'll need to use recovery tools on your installation media. If you don't have any installation media (like a disc or USB device) contact your administrator or PC manufacturer.
    I don't wish to muddy the waters any, but coincidentally I had a Windows update during the morning when first booting up?I searched the internet for a solution and came across the media creation tool which I downloaded to a USB and attempted to reboot the PC, nothing happened. I am now unable to reboot the PC by any means, this is complicated by the fact that both win 8.1 and Win 10 were downloaded installs and there are no system discs? I would appreciate your valued assistance on this issue and as I said earlier apologise for any inconvenience if this is in the incorrect Forum.
      My System SpecsSystem Spec

  2.    05 Jan 2016 #2
    Join Date : Nov 2015
    Posts : 13
    Windows 10 Home x64

    You can download the ISO of Windows 10 from here on another PC;


    Please make sure you have the 4GB USB Drive or DVD-R before you begin.
      My System SpecsSystem Spec

  3.    06 Jan 2016 #3
    Join Date : Dec 2015
    Posts : 2,145

    Hopefully it is just screwed up boot sectors.

    On another pc, install Macrium Reflect Free and create a Macrium Rescue Drive.

    Boot from Rescue Drive, and select Restore tab.

    Click 'fix windows boot problems'

    With a bit of luck, it will list both OSs. If you do not see both, you willnhave a different problem.

    Select one of them as default (can change later).

    Then click next, finish and it will rebuild boot sectors.

    After this, if 10 is broken, you can clean install, overwriting broken version.
      My System SpecsSystem Spec

  4.    06 Jan 2016 #4
    Join Date : Dec 2015
    Posts : 2
    windows 7

    Dual Boot, Error Code:0xc000000f

    Thanks for your note.
    As the issue was urgent I went onto an alternative Forum site for advice. During the exchange of messages, I came to realise that an old drive I was using for storage also had an partition for 'system reserved' which I assume was an old OS system, I deleted this partition and the problem seems to be resolved? however, I am looking now to separately clone both partitions and to copy into 2 drives, I will come back soon and let you know if all is OK thanks for your assistance anyway.,
      My System SpecsSystem Spec


Similar Threads
Thread Forum
Solved Dual-Boot System upgraded to Windows 10, now Win7 gives LogON error
I have a dual boot system in the following configuration: HDD-0 = Win7 OS, HDD-1 = Win7 OS, WinXP OS. I have successfully booted into each of these operating systems - and the Win7 OS on HDD-1 is an exact clone of the primary OS on HDD-0. ...
Installation and Setup
Solved Windows 10 Can't boot, error 0xc000000f
Hello forumers. Yesterday I removed dual booting Linux and after that my Windows 10 won't boot up. I have tried everything. The cmd commands: bootrec /FixMbr; bootrec /FixBoot; bootrec /RebuildBcd; Bcdboot commands and everything. Then I tried...
Installation and Setup
boot loop - error code - system thread exception not handled
Hi, i am using windows 10 from 1st of august by upgrading from win7ultimate,thought of clean install at a later time. after a day,the system stuttered while watching videos through vlc,or at youtube(maybe by just by watching), after some days the...
General Support
Win 10 Error code 0xc1900101-0x20017 SAFE_OS During Boot
I'm using the MediaCreationToolx64 and received the error message shown in the title as the actual installation started. That is, after all the checking for updates etc. The system was returned to its original Win 8.1 state. Does the error code or...
Installation and Setup
Solved Boot Manager Status: 0xc000000f boot selection failed
Windows failed to start. A recent hardware of software change might be the cause. To fix the problem: 1.Insert your Windows installation disc and restart the computer. 2.Choose your language settings, and then click "Next". 3.Click "Repair your...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 08:01.
Find Us
Twitter Facebook Google+

Windows 10 Forums