How to boot from newly installed SSD


  1. Posts : 4
    Windows 10 home
       #1

    How to boot from newly installed SSD


    How to boot from newly installed SSD-disk-management.png

    Hi,
    Novice question:
    I just installed a new SSD (disk 1) on my laptop and used Samsung's tool to clone my OS drive (C: on disk 2) onto it.
    This was done with no error, however I cannot boot from the new SSD in bios, as this hangs up the computer.

    I assume this has to do with C: still being the boot and active partition, and the system partition (also active) being on Disk 0 (HDD).

    I attached my disk management screenshot for reference.

    Could someone please explain to a novice like me how to make my new SSD (disk 1) the boot drive? For info, I do not have a windows OS CD but already created a windows 10 repair disk.

    Thanks and appologies if this has already been answered in another thread (could not find specific answer to my situation)
      My Computer


  2. Posts : 3,505
    Windows 10 Pro 64-bit 21H1 (May 2021 build 19043.1083)
       #2

    If you want to keep both disks in the computer, you must enter BIOS and go to BOOT section. Then in hard disk priority, make the new SSD first on the list, so it has higher priority than the older disk. If you still cannot boot, you may have to repair startup using Windows 10 DVD or troubleshooting options (you'll see them after 2-3 failed startups).
      My Computer


  3. Posts : 4
    Windows 10 home
    Thread Starter
       #3

    spapakons said:
    If you want to keep both disks in the computer, you must enter BIOS and go to BOOT section. Then in hard disk priority, make the new SSD first on the list, so it has higher priority than the older disk. If you still cannot boot, you may have to repair startup using Windows 10 DVD or troubleshooting options (you'll see them after 2-3 failed startups).
    Thanks, but I do not have a Windows 10 DVD (free upgrade from OEM windows 8, for which I do not have a DVD either) and unfortunately my computer fails to start if I put the new SSD as first priority in the hard disk priority.

    Do you have any other suggestion?
      My Computer


  4. Posts : 18,424
    Windows 11 Pro
       #4

    Use MiniTool Partition Wizard Free to shrink the OS partition on the SSD by 350mb. Copy the 350mb partition from Disk 0 to the SSD - that is the partition that contains your boot files. Use Partition Wizard to assign a drive letter to the new 350mb partition on the SSD.

    In File Explorer make sure to set it to show hidden files and folders.

    Use EasyBCD - make sure to point it to the BCD store on the NEW SSD boot partition - it will default to the system BCD still active on Drive 0. Add a new entry to point to the system OS on the SSD. Remove the entry pointing to the old OS partition. Use MiniTool Partition Wizard to set the new SSD 350mb partition on the SSD as active.
      My Computer


  5. Posts : 4
    Windows 10 home
    Thread Starter
       #5

    NavyLCDR said:
    Use EasyBCD - make sure to point it to the BCD store on the NEW SSD boot partition - it will default to the system BCD still active on Drive 0. Add a new entry to point to the system OS on the SSD. Remove the entry pointing to the old OS partition. Use MiniTool Partition Wizard to set the new SSD 350mb partition on the SSD as active.
    Thanks,

    I am not familiar with EasyBCD and don't know how to point it to the BCD store on the new SSD boot partition.
    Also, in case something goes wrong, I would rather be able to have 2 boot options, the old one (current settings) and the new one booting from the new SSD. Would the change above lock or corrupt the "old" boot leaving me at risk of not being able to boot at all?

    Thanks again,
      My Computer


  6. Posts : 18,424
    Windows 11 Pro
       #6

    Here's the documentation for EasyBCD:
    Editing a BCD on a different disk

    Once you get the BCD store on the new boot partition on the SSD set up, then you will select it to boot from in bios. If it doesn't work, all you have to do is go back to setting the original disk, Disk 0 as the boot drive in bios. After it is all working, you can delete the drive letter from the new boot partition (it's only needed in order to edit the BCD store). You can also delete the boot partition on Disk 0 and add that free space to the data partition, if you want to.
      My Computer


  7. Posts : 3,505
    Windows 10 Pro 64-bit 21H1 (May 2021 build 19043.1083)
       #7

    Deleting the boot partition from the other disk and extending the data partition, will have to move all data to the start of the disk and will take much time. I don't think it's worth it for 500ΜΒ or less.
      My Computer


  8. Posts : 18,424
    Windows 11 Pro
       #8

    spapakons said:
    Deleting the boot partition from the other disk and extending the data partition, will have to move all data to the start of the disk and will take much time. I don't think it's worth it for 500ΜΒ or less.
    Only 350mb of data will have to be moved. Take 5 minutes for the entire operation - at most.
      My Computer


  9. Posts : 3,505
    Windows 10 Pro 64-bit 21H1 (May 2021 build 19043.1083)
       #9

    Not sure about that, but if you have done it, you should know better.
      My Computer


  10. Posts : 4
    Windows 10 home
    Thread Starter
       #10

    Thanks to both, problem solved!!!:)
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 08:04.
Find Us




Windows 10 Forums