1.    11 Oct 2015 #1
    Join Date : Oct 2015
    Posts : 1

    Downgraded back to win7, error 0x00000007b

    Hello Forum,

    last night I decided to downgrade from Windows 10 and go back to my old windows 7. The problem I have now is that my computer won't load windows, I get blue screen of death with an error code 0x00000007b. I had an restore image for Win10 but it won't work now. Safe mode also won't load, and windows won't repair by itself.

    Mind you, I didn't do anything but let computer downgrade itself back to win 7.

    Do you have any suggestions how can I get my computer back and running again, or I just need to install new system?

      My System SpecsSystem Spec

  2.    11 Oct 2015 #2
    Join Date : Aug 2015
    Posts : 610

    I have not tryed myself, but I would try this:

    Boot from a DVD/USB stick with Windows 10 on it and then use the recovery options to restore your image again.
      My System SpecsSystem Spec

  3.    12 Oct 2015 #3
    Join Date : Jan 2015
    UK, Midlands
    Posts : 5,788
    Win 10 Pro (1607)

    Hi, Nekotamo92,

    So.. we don't really know the state of your disk- what's on it- whether you're primarily Windows 10 or Windows 7 in terms of what's on your active partition. In other words, how far it got through restoring Windows.old (your former Windows 7).

    Basic question- is your disk readable? The BSOD error suggests this: (this is an out of date interpretation, but you'll get the gist)
    "A 7b BSOD means INACCESSIBLE_BOOT_DEVICE, translating to the computer not being able to load Windows correctly from the drive. This is most typically caused by incorrectly configured drivers, BIOS, or bad hardware. Since you said you transferred data, I am led to believe that either 1) when transferring the data the storage controller driver was somehow overwritten, leading to incompatibility with your current storage controller on the new motherboard, 2) that the data transfer failed in some way and corrupted the boot partition, or most likely 3) that you replaced boot.ini, ntldr, or ntdetect.com on the new install. Normally the last two are pretty universal, meaning that boot.ini is most likely the culprit. You want to make sure that boot.ini is how it should be, and if it isn't boot into an XP recovery console, bind to that OS, and run bootcfg /rebuild. That should rebuild your boot.ini correctly.
    If the correct storage controller driver was loaded, it should be as simple as replacing that .sys file with the correct one (obtained from either the motherboard's manufacturer's website or the storage controller's manufacturer's website).

    If it is the second, which is the least likely, running chkdsk /r should fix that. ....."

    Also "The INACCESSIBLE_BOOT_DEVICE bug check frequently occurs because of a boot device failure. During I/O system initialization, the boot device driver might have failed to initialize the boot device (typically a hard disk). File system initialization might have failed because it did not recognize the data on the boot device. Also, repartitioning the system partition or installing a new SCSI adapter or disk controller might induce this error.

    This error can also occur because of incompatible disk hardware. If the error occurred at the initial setup of the system, the system might have been installed on an unsupported disk or SCSI controller. Some controllers are supported only by drivers that are in the Windows Driver Library (WDL). (These drivers require the user to do a custom installation.)"

    It could help to be able to view your system disk/partition, and see if you can read the disk and determine if the Windows folder is 7 or 10- or just unusable.

    By far the easiest way would be to connect your disk as an external disk to another PC and then have a look to see what you've got.

    Then run chkdsk on it.

    You should be able to use a Windows boot CD to get to a command prompt and run chkdsk, but you'd need a different boot disk compatible with your PC (think BIOS vs UEFI - which I don't have) to run a mini Windows OS in RAM from the CD and use explorer to view the disk.

    I bet this is where you should be wishing you had used disk imaging (Macrium Reflect or Aomei Backupper- which I use -free). If you regularly and before significant changes update your disk image, you can easily revert to a previoustly working state as well as having an accessible full backup of whichever disks and partitions you have imaged.

    Windows is fragile, and very easily corrupted- restoring an image is often much quicker than seeking a technical fix.
      My System SpecsSystem Spec

  4.    12 Oct 2015 #4
    Join Date : Sep 2015
    Posts : 2,187
    Windows 10 Pro 64-bit 1607 (AE build 14393.321)

    Well, Microsoft says this is when you change the hard disk configuration. For example, you set the hard disk mode to AHCI in BIOS, you install Windows and then you change it to IDE or RAID. Or you change the boot priority so your hard disk is no longer the first in the list of hard disks, see BIOS. This would give you that error. Check that you haven't modified these characteristics. If they weren't modified, boot with Windows 7 DVD-ROM and try to Repair startup. If you run the repair from the hard disk it fails as it cannot access the disk properly. You must do it from the DVD-ROM. It is a good idea before restarting to chose the command prompt option and also run a check disk:

    chkdsk c: /f

    This will check disk c (assuming this is your hard disk) and try to automatically fix errors.
    Last edited by spapakons; 12 Oct 2015 at 05:48.
      My System SpecsSystem Spec


Similar Threads
Thread Forum
Problems trying to go back to Win7 after upgrade to Win10
I'm trying to rollback to Win7 after Win10 update. I've got some hardware that I want to use that's not compatible. I've tried going to recovery and 'Go back to Win7' but it's telling me I need to delete the users I've created. The problem is...
Installation and Setup
Solved Win7 to 10, installation fails, error 80070005
Currently running win7 home premium. Received notice from MS that my reserved update for win 10 was ready. Clicked to install the update. Download of files runs to 100%. Thereafter installation starts and eventually terminates with the message...
Installation and Setup
Solved Can you rollback to Win7 and then come back to Win10?
I am having an issue with Win1o that is not resolving itself and making me more and more frustrated so I want to roll back to Win 7 and comeback to 10 to see if that will repair the issue. Is this possible? My initial problem is here:...
General Support
How to ROLL BACK from Win10 to Win7?
I've decided not to use Win10 and wish to roll back to the original Win7 that was on the drive. Win10 has the old system backed up to the Windows.old directory...but is there a tool or application in Win10 to initiate the roll back? I know I can...
Installation and Setup
Solved Kernel_Security_Check_Failure At 35%/Reverting Back To Win7 Pro 64-Bit
I would really appreciate some insight on this one : I have Windows 7 Professional 64-bit, legit, all of my programs are genuine and there is no malware/viruses on my system. I keep a very, very tight ship. I had reserved Win10 through the Get...
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 05:17.
Find Us
Twitter Facebook Google+

Windows 10 Forums