Page 1 of 2 12 LastLast
  1.    14 Oct 2014 #1

    Install on HP 23-N010 fail! :(

    So after making an image, I decided to make W10 TP the operating system. Got the 64-bit ISO and proceeded to do the install keeping all programs and data, iow an upgrade.

    All proceeded with no errors until the final boot. Then all I get is a blue screen that flashes. Tried powering down and booting same result.

    I had run the 32-bit version in a VM on this machine that worked OK, but wanted to make W10 my daily driver. Fortunately for me all the data that I have is on OneDrive including app data from W8 modern apps.

    Doing a restore with Acronis True Image 2014 and it seems to be proceeding just fine. I'll know how well it went in a little while.

    Once that's done and I've ensured all is good, I'll give the TP another whirl as a virgin and see what happens.

    For info, I've installed the TP on my Surface Pro 1st generation and my ASUS T100TA with no issues at all.
      My System SpecsSystem Spec

  2.    15 Oct 2014 #2
    Join Date : Oct 2013
    California, Florida, Boston
    Posts : 281

    Does it reboot into the install or the install media? Take the media out if there's any doubt.

    Can we see a pic of what you see when this happens?

    If it returns to the install and shows any other progress then it might help to boot into Device Manager to disable any erroring Devices to see if install will complete, then update the drivers from the desktop, same as for Device Manager - Access During Windows 7 Installation - Windows 7 Help Forums
      My System SpecsSystem Spec

  3.    15 Oct 2014 #3

    I'm actually now in more trouble and haven't quite figured out what to do at this point. But I'm frustrated and irritated, so I'm going to leave it all alone for the night.

    Here's where I'm at.

    1. Got W8.1 back on and working fine
    2. Disable Malwarebytes Premium and took the Logitech T650 stuff out of the mix.
    3. Downloaded a new 64-bit ISO and started another upgrade install.
    4. Watched all of it going on and the install gets to the final parts and then flashing screen and often an error with logonui.exe. Never gets past this. And no, can't take a picture as it won't get up enough to do it.

    So I thought 'no big deal do another Acronis restore'. But now the system says the bootable USB stick isn't bootable anymore.

    So I can't boot at all except to somewhere in the final stages on w10 install. Can't boot to get a restore image back on. Hell, can't boot into anything useful at this point.

    Tomorrow's another day. I'll get a CT scan in the morning and then a round of golf. THEN I'll tackle getting this machine back up with something.
      My System SpecsSystem Spec

  4.    15 Oct 2014 #4
    Join Date : Oct 2013
    California, Florida, Boston
    Posts : 281

    It might be easier to shrink a partition from C to This worked for me today in 20 minutes after waiting an hour for an Upgrade to putter along and fail.

    Then you have the two side by side to access files from 8, install Programs from your downloads, compare and contrast.
      My System SpecsSystem Spec

  5.    15 Oct 2014 #5

    I had thought of a dual-boot situation, but frankly at this point I'm not ready to allow W10 to run on this particular HP in any way other than inside a VM.

    /slight rant on
    I come from the Apple world, and recovery on them is nowhere near as convoluted and as much of a PITA as it is with Windows these days. On them you clone the internal drive to an external and if you need to restore, you just boot to the external drive and clone back to the internal. Just easy as pie!
    /slight rant off
      My System SpecsSystem Spec

  6.    16 Oct 2014 #6

    I followed the directions to create a dual-boot. Yeah!!!! Everything works just fine. thanks for the suggestion and the link.

    A few questions:
    1. Why would I not want to leave the computer with legacy boot vice UEFI??

    2. When I get finished or when W10 ships, how do you go back to a single boot situation?? I've seen nothing on this.

    Again, thanks for the dual-boot suggestion, it really worked well and the HP likes it!!
      My System SpecsSystem Spec

  7.    16 Oct 2014 #7
    Join Date : Oct 2013
    California, Florida, Boston
    Posts : 281

    UEFI offers some benefits that I'd try it first if you reinstall but wouldn't reinstall just for that. Legacy is there if you have installation problems you don't want to get too deeply into though we can normally always get it installed to UEFI.

    How to get rid of Dual Boot depends on where the System flag is. If you'll post a screenshot of Disk Management - Post a Screen Capture Image - Windows 7 Help Forums we can tell you what's needed and even make adjustments now so the OS you will want to jettison can merely be deleted in Disk Mgmt.
      My System SpecsSystem Spec

  8.    16 Oct 2014 #8

    Thanks for the info on UEFI. I can just turn it on or off as needed it seems. The only time I need to turn it off is when I want to do boot a USB stick for some things.

    The irritating part is that each mfg decides just how they want you to do that. No consistency for the most part.

    And I've now read a few articles that have told me exactly how to do it. Basically edit the windows boot manager and then do pretty much anything I want to with the partition. Simpler than I had thought it turns out.
      My System SpecsSystem Spec

  9.    16 Oct 2014 #9
    Join Date : Oct 2013
    California, Florida, Boston
    Posts : 281

    Sometimes it's more enabling Compatibility Mode (CSM) than disabling UEFI. Then boot instlation media as Legacy instead of its UEFI version listed.

    More about the difference:
    Last edited by gregrocker; 16 Oct 2014 at 18:30.
      My System SpecsSystem Spec

  10.    15 Nov 2014 #10

    I want to re-open this thread in hopes someone can offer some suggestions.

    If I try to upgrade the existing W8.1 install on this HP AIO desktop, it won't do it as documented at the beginning of the thread.

    But a virgin install on a dual-boot installation works just fine up to this latest build of W10. I did have to get some drivers and such but all works fine on that.

    So I started looking at what the HP default installation is doing that is different, and here's a few things I found.

    1. In tasks, launcher.exe is loading about 5 or 6 things, most from Pokki. In my search on the internet I can't find much in the way of really good info about this and why or why not to have it there.
    2. HP has plenty of of Cyberdrive (?) stuff on the machine with some auto loads going on too. What's the downside of not having those apps there besides the most obvious ones of not doing whatever those apps allow for?
    3. Bunch of HP stuff of course. One about fingerprinting which isn't supported as far as I can tell, on this particular machine.

    I could and might start getting rid of lots of this to see if I can get it to do an upgrade, I do have a good image to restore to, but if someone can suggest, or has seen issues with some of this stuff not being there, I would appreciate some feedback.
      My System SpecsSystem Spec

Page 1 of 2 12 LastLast

Similar Threads
Thread Forum
Solved Driver Updates Fail to Install.
So i went to check for updates, it found 2 updates for my sound and video cards. The new drivers were downloaded... But failed to install, giving me the following error: 0x8024007. If i check for updates again, Windows Update will not find...
Drivers and Hardware
New NVIDIA Windows 10 drivers fail to install?
Woke up this morning..saw NVIDIA had released drivers for Windows 10. I downloaded them at home from my phone using Google Remote Desktop. Tried installing them 3 times…keep getting failed installations? Haven’t had this happen in a long time. Any...
Drivers and Hardware
Solved Unable to Install Win10 on tablet using USB - Boot Fail?
Hello; The resolution for me was to 'Disable Secure Boot'! I thank everyone for the assistance. Here is my original question: I'm unable to install the windows 10 tech preview. Any assistance is appreciated.
Installation and Setup
HP 23-N010 Beats machine no audio
After successfully installing W10 as dual-boot, I started adding software that I use on a daily basis. And I noted during the install process that I got some sounds on occasion during the process. But when I run iTunes or any other audio/video...
Drivers and Hardware
2014 Sochi Olympics Fail
Conditions at Sochi Olympics are bad/hilarious...
Chillout Room
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 18:43.
Find Us
Twitter Facebook Google+

Windows 10 Forums