New
#1
Windows 10 Pro clean installation on SSD stops at settings step
I followed steps for installation on SSD with UEFI Everything went well until the first restart after installation files reached 100% When screen came back it was back to original Install now screen.
I had disabled secure boot in firmware as suggested. SSD is the only drive attached at present. Should I attempt a reinstallation or are there other steps I should pursue first.
I am using a retail licensed Windows 10 Pro version installed on USB using Microsoft creation media.
Dell 8700 XPS
i7 4790 processor at 3.40 Ghz
16GB memory
2 TB HDD Windows 8.1 installed presently not connected
Kingston HyperX 120GB