Page 8 of 10 FirstFirst ... 678910 LastLast

  1. Join Date : Jun 2014
    Posts : 4,322
    Windows 10 Pro
       2 Weeks Ago #71

    Wow! This post is long and very confusing. I agree with the suggestion of running setup exe from the mounted ISO and do a repair install. A whole lot less confusing.
      My System SpecsSystem Spec


  2. Join Date : Oct 2015
    Posts : 79
    1: Windows 10 Pro (64bit), 2: Windows 10 Pro (64bit)
       2 Weeks Ago #72

    NavyLCDR: I followed your instructions. I deleted the old stuff and also more files so I now have 35GB of free space.

    In my case the virtual drive letter is L: I mounted the iso from a folder in Documents to where it was downloaded to. I opened the CMD as administrator (you didn't mention admin. but I did that anyway). I entered "Dism /Online /Cleanup-Image /RestoreHealth /Source:L:\Sources /LimitAccess " and it began to run and immediately held at 20% for 13 minutes and my C: drive was being accessed. After 13 minutes it quickly went to 100% and stated " Error 0x8000f081f The source files could not be found. Use the "source" option to specify the location of the files that are required to restore the feature. ..." Please advise.
      My System SpecsSystem Spec


  3. Join Date : Jul 2015
    Posts : 6,343
    Windows 10 Pro
       2 Weeks Ago #73

    BretMan said: View Post
    Please advise.
    I just noticed this:
    DISM - Repair Windows 10 Image - Windows 10 Forums

    Mount the ISO file and try:
    Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:L:\sources\install.wim:1 /limitaccess

    or
    Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:L:\sources\install.wim:2 /limitaccess

    Assuming your mounted ISO file still gives you drive letter L:
      My System SpecsSystem Spec


  4. Join Date : Oct 2015
    Posts : 79
    1: Windows 10 Pro (64bit), 2: Windows 10 Pro (64bit)
       2 Weeks Ago #74

    Thanks very much for those suggestions. I tried both of NavyLCDR's commands and the results were exactly the same as the one tried before them.What do you suggest next?

    " I agree with the suggestion of running setup exe from the mounted ISO and do a repair install. " Is this a different approach?
      My System SpecsSystem Spec


  5. Join Date : Oct 2015
    Posts : 1,198
    Windows 10 Pro X64
       2 Weeks Ago #75

    Hi,

    I tried both of NavyLCDR's commands and the results were exactly the same as the one tried before them.
    That's really odd.

    With the ISO file mounted in L: could you run the following from CMD Admin ?

    Code:
    dism /Get-WimInfo /WimFile:L:\sources\install.wim /index:1
    From what I recall your current version of Win 10 is 1511, correct ?

    Cheers,
    Last edited by fdegrove; 2 Weeks Ago at 11:21.
      My System SpecsSystem Spec


  6. Join Date : Oct 2015
    Posts : 79
    1: Windows 10 Pro (64bit), 2: Windows 10 Pro (64bit)
       2 Weeks Ago #76

    Yes, Windows 10 Pro 64 v.1511 Here's the result of that command:

    Click image for larger version. 

Name:	1-CMD_2016-11-16.JPG 
Views:	11 
Size:	43.3 KB 
ID:	110304
      My System SpecsSystem Spec


  7. Join Date : Oct 2015
    Posts : 1,198
    Windows 10 Pro X64
       2 Weeks Ago #77

    Hi,

    I don't understand why it can't repair these files....

    " I agree with the suggestion of running setup exe from the mounted ISO and do a repair install. " Is this a different approach?
    I view it at a last resort solution but it seems we have no further options. Maybe @NavyLCDR has some ideas left.

    Cheers,
      My System SpecsSystem Spec


  8. Join Date : Oct 2015
    Posts : 79
    1: Windows 10 Pro (64bit), 2: Windows 10 Pro (64bit)
       2 Weeks Ago #78

    In the meantime would the errors list from the result of SCF /Scannow help point to possible solutions?
      My System SpecsSystem Spec


  9. Join Date : Oct 2015
    Posts : 1,198
    Windows 10 Pro X64
       2 Weeks Ago #79

    Hi,

    That may help for sure.

    You could also try running the DISM command when in Safe Mode and see if that helps any.
    WIN + R > msconfig.exe > "Boot" > check "Safe Boot" and reboot the machine.

    Cheers,
      My System SpecsSystem Spec


  10. Join Date : Oct 2015
    Posts : 79
    1: Windows 10 Pro (64bit), 2: Windows 10 Pro (64bit)
       2 Weeks Ago #80

    Ok. I have a CBS.log file for when I tried the install. I Don't see the SFC log file in CBS. There is a CBS.persist_.....log. Both seem to state about "installing" and files for repair. It's pretty long and I'm not sure how to post it here.

    "You could also try running the DISM command when in Safe Mode and see if that helps any.
    WIN + R > msconfig.exe > "Boot" > check "Safe Boot" and reboot the machine. " To clarify, you want me to reboot into safe mode, then open the cmd window and run what - one of NavyLCDR's suggested commands?
      My System SpecsSystem Spec


 
Page 8 of 10 FirstFirst ... 678910 LastLast


Similar Threads
Thread Forum
Need a migration guide for specified scenario
Hi, I have a pc with SSD and Windows 8 in it. By mistake I did not wipe the windows 8, and now windows 10 is on another HDD partition. Below is what my partitions look like. 103340 Is there any guide to migrate my Windows 10 installation...
Installation and Setup
OS migration tools
Hi everyone, I bought a new computer with Windows and wonder if there are some tools to move all of my settings, files and applications to a new one. Maybe someone has used any of applications which move all of these things? I heard about...
Installation and Setup
Migration to an SSD
I moved the Windows 10 installation of my mother's PC from a hard drive to a SSD using DriveImageXML drive2drive feature with Windows running. I copied the boot system partition and the Windows partition (C:) then booted with the new system...
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:26.
Find Us
Twitter Facebook Google+



Windows 10 Forums