Page 2 of 3 FirstFirst 123 LastLast

  1. Joined : Oct 2016
    Posts : 21
    Windows 10 Home 64-bit
       13 Oct 2016 #11

    what is this CDPUserSvc for? is it important for windows or we can disable it without any problem? I can not disable it, it gives me error of "The parameter is incorrect". I want to know if it makes any problems in performance of windows.
      My System SpecsSystem Spec


  2. Joined : Jul 2014
    Serbia
    Posts : 7,148
    All kinds
       13 Oct 2016 #12

    Omidz 10 said: View Post
    what is this CDPUserSvc for? is it important for windows or we can disable it without any problem? I can not disable it, it gives me error of "The parameter is incorrect". I want to know if it makes any problems in performance of windows.
    windows 10 - What is the CDPUserSvc service? - Super User
      My System SpecsSystem Spec


  3. Joined : Nov 2013
    Central Florida
    Posts : 323
    Win 7 Pro/32, Win 10 Pro/64/32
       13 Oct 2016 #13

    Omidz 10 said: View Post
    what is this CDPUserSvc for? is it important for windows or we can disable it without any problem? I can not disable it, it gives me error of "The parameter is incorrect". I want to know if it makes any problems in performance of windows.
    Did you not read my post? (#8)

    PS: Read more about starting and stopping services here:
    Black Viper Black Viper | www.blackviper.com

    For a comprehensive list of Windows services and an explanation of each one,
    go to the Black Viper's web site.

      My System SpecsSystem Spec


  4. Joined : Oct 2014
    Trnava
    Posts : 1,625
    Windows 10 Home x64
       13 Oct 2016 #14

    I guess, you mean MessagingService, you probably use something, that needs it, it does not start on mine. You can use:

    reg add "HKLM\System\CurrentControlSet\Services\MessagingService" /v "Start" /t REG_DWORD /d "4" /f
      My System SpecsSystem Spec


  5. Joined : Oct 2016
    Posts : 7
    win 10
       13 Oct 2016 #15

    Dear TairikuOkami,
    I have also implemented this last command, but it's same result like before.
    At every start up these randomized services are started, see please image:

    Click image for larger version. 

Name:	Ashampoo_Snap_2016.10.14_06h16m57s_001_.jpg 
Views:	2 
Size:	56.9 KB 
ID:	105851
      My System SpecsSystem Spec


  6. Joined : Oct 2014
    Trnava
    Posts : 1,625
    Windows 10 Home x64
       14 Oct 2016 #16

    Check registry, if Start is set to 4 on all. Maybe their names are in German, but that it is highly unlikely.



    For the record, those are the only services, I have running.

      My System SpecsSystem Spec


  7. Joined : Oct 2016
    Posts : 7
    win 10
       16 Oct 2016 #17

    I checked every single service; some of them had the start value 3 and I changed to 4, disabled, in the registry. But by new start the system randomized the name and the services are all again there, see please picture.

    Click image for larger version. 

Name:	Ashampoo_Snap_2016.10.16_05h33m28s_001_.jpg 
Views:	4 
Size:	56.9 KB 
ID:	106245
      My System SpecsSystem Spec


  8. Joined : Jul 2016
    Posts : 4
    Windows 7 & 10
       24 Oct 2016 #18

    mariovalerio, I also use Chameleon Startup Manager and the same thing is happening to me after the Anniversary Update (boo! )

    I sent Chameleon a message asking them to investigate this randomizing situation and to come up with a workaround. If I get a response, I'll try to post it here.

    In post # 4, TairikuOkami showed some commands that suggested they could resolve this randomization problem. I'm about to try them, and will report back...
      My System SpecsSystem Spec


  9. Joined : Jul 2016
    Posts : 4
    Windows 7 & 10
       24 Oct 2016 #19

    Well, mariovalerio, the results of those commands were mixed. On the down side, Chameleon Startup Manager reported pretty much the same bunch of randomized "new" startups. On the up side however, all of them showed up with Chameleon's "Enable" option underneath, which means that they were all automatically disabled! That was confirmed by bringing up the services list (services.msc), which also showed pretty much all of them were disabled (or at least not running).

    To be frank, I didn't check things out exhaustively before running those commands that TairikuOkami posted. Thus, I'm not certain to what degree they helped (though I'm more than willing to credit them - Thanks TairikuOkami !)

    I also applied a very, very few of the Windows 10 Tweaks from a batch file created and posted by TairikuOkami that I found in his/her sig. The main tweak I wanted (and used) was as follows:

    Code:
    rem Remove Microsoft Synchronization Manager to prevent it from running at every startup (to restore run "sfc /scannow")
    taskkill /im mobsync.exe /f
    del "%WINDIR%\System32\mobsync.exe" /s /f /q

    Also, note that you might want to confirm that, in the Chameleon SM settings: Options -> Preferences -> Startup Manger that "Disable without warning self-added items that you used to disable manually" is checked (though I'm not certain that this is what's keeping those unwanted randomized startups disabled). There's also the "Disable new items automatically", which is something I'm going to start enabling from now on.

    Finally, when you reboot and see all those Chameleon SM messages pop up, wait until the list is complete and then choose any one of them, right-click and select "Close All" -- unless, of course, there are some that are legitimate or if any of them give you the option to disable them (instead of enable).

    I hope this helps!
      My System SpecsSystem Spec


  10. Joined : Oct 2016
    Posts : 7
    win 10
       24 Oct 2016 #20

    I have checked all those services and the most of them were disabled, now they are all disabled ("start" in the registry set on "4").
    In fact Chameleon Startup Manager asks if they have to be enabled, being them "new" (because of the randomized name) and disabled. Of course I push the button "close all", but this leave them only disabled, the services self aren't deleted. By next start up they are again there with a new randomized name and they will be added in the Chameleon list; after a while it becomes a very long list that you may delete with the option "remove" from Chameleon start up manager or by deleting the randomized services over regedit command.
    Finally: that's no real solution.
    I tried to delete the services at all, which are started from .dll files by renaming these .dll files (for the case that something gets wrong), but Windows doesn't allow this, I tried on several ways and it's impossible to rename them.
    I have a solution for renaming the .dll files, which I will try in the next days and which has worked out in another case, as I had a file which wasn't impossible to delete: using another, external OS.
    Formerly, on another computer with disk drive, I used Knoppix, which worked very good, but now I have no disk drive and Knoppix is supposed to start from a CD/DVD.
    Now I will try with Ubuntu from an USB drive, it shall work.
    Once started from the USB drive, you browse until to find the .dll file and rename it (better to rename the extension, rather than the file name). And then restart from Windows.
    If something gets wrong -> new start from USB drive and rename it as it was originally.

    Let's see... I will report accordingly
      My System SpecsSystem Spec


 
Page 2 of 3 FirstFirst 123 LastLast


Similar Threads
Thread Forum
Services - Restore Default Services in Windows 10
How to Restore Default Services in Windows 10 A service is an application type that runs in the system background without a user interface and is similar to a UNIX daemon process. Services provide core operating system features, such as Web...
Tutorials
Tasks Interrupting Screensaver
I have a file server that has several tasks running every minute that run batch and vbs files to ensure software is still running. I also want to make sure the server stays locked so after I use it, it will lock itself if I forget to. I had a...
General Support
have you disabled the 2 MRT.exe tasks ?
Hi i have noticed with autorun that i have 2 tasks that run mrt.exe Microsoft Malicious Software Removal Tool i have disabled them do you have them ? thanks
General Support
Default (factory) settings for msc.services (services)
Just wondering if anyone can direct me to a source that shows the factory default settings for Windows 10 services. Thanks.
Performance & Maintenance
Solved God Mode / All Tasks
I did a search and nothing came up on it, I didn't find it in the tutorials section, I copied my god mone from Win7 to a flash drive dragged and dropped on my W10 desktop and it works as it always has,,, not sure if someone wants to add it, I find...
General Support
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:36.
Find Us
Twitter Facebook Google+



Windows 10 Forums