1.    20 Aug 2016 #1
    Join Date : Aug 2016
    Posts : 2
    win 10

    Boot Error 0xc0000001

    core i7, 16 GB, 120GB SSD, 2TB HD, radeon graphic, MSI mobo Win 10 up from 8.1.

    Rather perplexing boot problem. I use my computer fine, turn it off. Next day I can't boot. You get the screen that takes you to the screen with the 8 options (safe mode, safe mode w networking, boot logging, etc) but no matter which option you choose, you wind up back at the same screen - can't boot.

    I said to myself, no problem. I had cloned my SSD with the OS earlier when it was working fine just for these situations. I put the clone in, access the boot option, and boot from the clone and FUDGE! still doesn't boot.

    I put in my 8.1 OS disk, (since I upgraded there is no win 10 disk) get to advanced options, rolled back to a sys restore date when it was working fine. No go - still can't boot. What good is it to have this stupid feature if it doesn't work ?!!!!

    So I go to advanced options again, and try the command line. Ran bootrec with various options to rebuild the boot record and MBR, etc. They all say completed successfully, still no go - can't boot.

    I've run that dism command, but it just aborts with errors.

    previously, I'd run separate disk utilities to check my SSD that has the OS on it, and it showed no errors.

    I'd also periodically ran anti-virus (avira) and MB anti-malware. They either never found anything, or they just found mildly annoying things, but no serious problems.

    At this point, I'm thinking some kind of hardware failure - if a restore point doesn't work, and a cloned disk can't boot, and OS repairs don't work, what else could it be?

    However, I tried running Ubuntu from a disk and it boots fine. BIOS shows the full 16GB ram available. I can access the internet, and all my hard disks show up, and I can access files and even open them, which tells me my keyboard, mouse, display, CPU, ram and hard disk and network connections, are all working fine.

    I will say that prior to this boot problem, I think windows was continually trying to update the OS, but was unable to. Frequently when I tried to turn the computer off, it would run forever trying to update. I would never turn it off, but in the morning, the computer was off - either from the original shutdown command or from power management. A company that can't update it's own OS, is just -------. They take all control of the update away from us, so there is not much we can do except trust them HA!

    Anyway, obviously I'm in dire straits until I can get this stinking piece of software up and running again. Any help would be appreciated. BTW, my bios setting for the sata drives only have 3 options, one is disable, one is IDE. I forget the third, but since disabled and IDE are clearly not correct for a SATA drive, the third option is the only possible one to use.

      My System SpecsSystem Spec

  2.    20 Aug 2016 #2
    Join Date : Aug 2016
    Posts : 2
    win 10

    Just FYI, when I say run Ubuntu from a disk, I mean from a DVD - so I wasn't trying to install Ubuntu anywhere on the computer.
      My System SpecsSystem Spec


Similar Threads
Thread Forum
Solved Boot Error
My laptop with Win10 is not booting. After hanging for about a minute on the Boot Page (the first that appears after turning on) I get a page which keeps repeating the following message: Broadcom UNDI PXE-2.1 v11.0.11 Copyright (C) 2000-2000...
General Support
Solved MBR Error 1 on cold boot
I recently upgraded a Toshiba A300 laptop (2009 model) from Win7 to Win10. I use a 125GB Kingston SSD as primary and a 280GB Hitachi as a secondary internal hard disk, in place of DVD drive, inside a craddle. This is a single OS installation, no...
Installation and Setup
Inaccessible_Boot_Device & Error code 0xc0000001
Hi Guys, I had a pretty much faultless Win 10 setup with all the latest patches installed then this morning I connected an external USB hard drive which I had used several times before but this time Windows said it needed to install a new driver....
BSOD Crashes and Debugging
Solved Error at boot
See Error - Event ID DistributedCOM - Microsoft Community This error appears multiple times at almost every boot. What can be done to eliminate it? "The application-specific permission settings do not grant Local Activation permission for...
Performance & Maintenance
Cannot boot. Is error 0xc000021a unsolvable?
Hi I upgraded from Windows 7 to Windows 10 and it was working fine for a few days but now whenever I try to boot it up I get BSOD with error code 0xc000021a. I've tried the following 'fixes': System restore --- Runs for a few minutes and...
General Support
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 12:24.
Find Us
Twitter Facebook Google+

Windows 10 Forums