I have a Samsung SSD EVO 850 500GB and while I had been using it on my laptop with Windows 7 everything had been running ok even the Rapid mode, but when I updated to Windows 10, I am getting this error :
Rapid mode is in inactive state due to system internal errors. Please disable Rapid Mode.
I am using the latest version of Samsung Magician 4.9.5 and Firmware EMT02B6Q.
Do you have any ideas please ?
Which version of Samsung Magician are you using?
v4.9 seems latest..
Suggest you try disabling fast startup.
8) If fast startup is enabled on windows 8 and 8.1 machines, RAPID
mode enable/disable requires system restart. Shutdown followed by turning
-on the power will not activate RAPID mode enable/disable. By default fast startup
is enabled.
9) Flush command of operating system and/or application may cause
variation in performance when RAPID mode is enabled(especially when
Write-Cache Buffer Flushing is On).
10)
Sometimes on AMD PC with AMD and AS Media storage controllers it
was found that the IOs takes a longer time to complete. In such cases if
RAPID was enabled, it may get automatically disabled due to such IO
errors. It may display "RAPID is in inactive state". User has to reboot
the PC to enable RAPID mode.
Are you using IDE or AHCI mode?
AHCI vs IDE - Difference and Comparison | Diffen
Quote