New SSD freezes my computer past login screen (and misc.)

Arc · 01 May 2016

Code:

[IDE]

Item    Value    
Name    Asmedia 106x SATA Controller    
Manufacturer    Asmedia Technology    
Status    OK    
PNP Device ID    PCI\VEN_1B21&DEV_0612&SUBSYS_06121849&REV_01\4&33B94F4C&0&00E3    
I/O Port    0x0000D050-0x0000D057    
I/O Port    0x0000D040-0x0000D043    
I/O Port    0x0000D030-0x0000D037    
I/O Port    0x0000D020-0x0000D023    
I/O Port    0x0000D000-0x0000D01F    
Memory Address    0xF7300000-0xF73001FF    
IRQ Channel    IRQ 19    
Driver    c:\windows\system32\drivers\asahci64.sys (1.3.1.0, 48.59 KB (49,760 bytes), 9/21/2011 5:56 PM)

This is the latest SATA controller form Asrock?
Probably not! See here: ASRock > Z77 Extreme4

9/8/2015

Windows^® 10

3.48MB

ASMedia SATA3 Driver ver:3.1.6.0000

Get this driver and see if it can detect the SATA Controller/Hard drive. If not, let us see a camera snap of the screen. Solution is possible.

byronicasian · 01 May 2016

Just quick update, not sure if it its related.

On first restart, I was unable to boot into any part of windows (just stuck at the black loading screen with the circular loading dots). Forced shutdown and went into BIOS, and played around with the storage configurations (switched both controllers to IDE instead of AHCI).

This got me to a "UNACCESSIBLE BOOT DEVICE ERROR" screen, which got windows to open the repair/troubleshooting screen. It got me into safe mode before I realized I hadn't attached my SSD yet.

After I attached the SSD, went back to the BIOS to retoggle AHCI mode. I have booted in to Windows successfully. Per Magician, by firmware is up to date (I was wrong in prev post) and can detect SATA Interface.

Fingers crossed those initial bits were just one offs.

Arc · 01 May 2016

SSD 850 EVO 250GB is detected.
Asmedia 106x SATA Controller is up to date (10/30/2015).

A good job very well done!

Let us know how it goes.

Just a request ... if it needs to provide the system information file, save it rather than exporting it. The .nfo version gives easier access than the .txt file.