1.    03 Aug 2015 #1
    Join Date : Aug 2015
    Posts : 5
    Windows 10 64bit pro

    Black screen but Windows 10 loads normal

    Hey all,

    I've recently upgraded my Windows 7 HP 6200 pro machine to Windows 10 pro. It all went fine however this annoying problem, when I turn on the computer, the screen is blank for 1 minute.. I see no HP logo or any chance to boot into bios, or other stuff.. like info from devices that used to pop up..first thing I see is the Windows logo and the windows loads and works normally.. Also when I restart the PC the windows restarts and then just monitor "going to sleep" and won't boot until I hard power off and power on again

    I've tried clearing BIOS battery out, trough the button,
    I made sure I have connected VGA primary input and only the monitor that supports bios resolution.
    I've tried doing sfc /scannow , updating , rolling back drivers etc etc updating BIOS to the latest version,
    I only have onboard gfx card..

    After reading many sites I learned that it has to do something with this UEFI bios or whatever,.. but previously I had no such problems on Windows 7. Does anybody know what I could do?

      My System SpecsSystem Spec

  2.    03 Aug 2015 #2
    Join Date : Aug 2015
    Posts : 1
    window 10

    same problem

    i have the same problem with laptop HP.
      My System SpecsSystem Spec

  3.    12 Aug 2015 #3
    Join Date : Aug 2015
    Posts : 5
    Windows 10 64bit pro

    I solved this problem by updating my bios to the latest version. :\ Altough I couldn't find one on official site, I found it on the end on google.
      My System SpecsSystem Spec


Similar Threads
Thread Forum
Solved Fix for windows 10 booting to a black screen
Okay if you have just upgraded to windows 10 and are sitting at a black screen for way too long here's the problem and how to fix it. If you have an on board Intel graphics controller as well as an add on graphics card, windows thinks you have...
General Support
Windows 10 Black Screen During Install
Hey guys, I was installing windows 10 (8.1 before) on my Dell inspiron 15 7000 series (7537), and it progressed to restarting after the installing drivers step, but after the restart and going through the dell startup screen, everything went...
Installation and Setup
Windows 10 stuck at black screen
hi, i tried upgrading my windows 7, but failed 5 times. step 1 on copying files are 100% step 2 installing features n updates are 100% step 3 FAILED, it stuck on black screen and freeze, nothing i can do besides force restart and its restored...
Installation and Setup
Windows 10 - Black Screen not able to Login
I upgraded to windows 10 from 7 through Microsoft's updater. I used Windows 10 for setting up my calendar, by the time it restarted and System reboots and ends up in black screen without getting into login page. I tried to perform to open in...
General Support
Black screen while in Windows 10 setup
I was in Windows 10 setup using the Media tool. I have reached the step where it restarted then a big circle came up with three parts under saying like "Copying Files" and other two things. Then, suddenly it restarted and only a black screen was...
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:01.
Find Us
Twitter Facebook Google+

Windows 10 Forums