Connect USB 3.0 Hub into a USB 2.0 Port? 3.0 Speed?

Page 1 of 2 12 LastLast

  1. Posts : 314
    Windows 10 Pro x64 Build 1803
       #1

    Connect USB 3.0 Hub into a USB 2.0 Port? 3.0 Speed?


    Hello Everyone,

    Can I take a USB 3.0 hub and plug it into a USB 2.0 port? If so, will I get the USB 3.0 Speeds?

    Thank you for your time and assistance.
      My Computer


  2. Posts : 18,424
    Windows 11 Pro
       #2

    Yes and No, in that order.
      My Computer


  3. Posts : 314
    Windows 10 Pro x64 Build 1803
    Thread Starter
       #3

    NavyLCDR said:
    Yes and No, in that order.
    Hello and good to see you again NavyLCDR,

    Thank you for your help. I guess then it will probably be better to get the USB 3.0 card and then plug-in the hub. How am I thinking so far?
      My Computer


  4. Posts : 18,424
    Windows 11 Pro
       #4

    mrje1 said:
    Hello and good to see you again NavyLCDR,

    Thank you for your help. I guess then it will probably be better to get the USB 3.0 card and then plug-in the hub. How am I thinking so far?
    If you want USB 3 speeds, then you have to have a USB 3 port available on your computer, either directly from the motherboard or from an add-on card. To the best of my knowledge, though, when you are using a hub you will divide the USB 3.0 speed of the single port it is plugged into among the in use ports on the hub. So if you have two hard drives connected to the hub, and you are copying from one USB hard drive to the other USB hard drive, the transfer will be occurring at 1/2 USB 3.0 speed because the data still has to flow through the single USB 3.0 port.
      My Computer


  5. Posts : 314
    Windows 10 Pro x64 Build 1803
    Thread Starter
       #5

    NavyLCDR said:
    If you want USB 3 speeds, then you have to have a USB 3 port available on your computer, either directly from the motherboard or from an add-on card. To the best of my knowledge, though, when you are using a hub you will divide the USB 3.0 speed of the single port it is plugged into among the in use ports on the hub. So if you have two hard drives connected to the hub, and you are copying from one USB hard drive to the other USB hard drive, the transfer will be occurring at 1/2 USB 3.0 speed because the data still has to flow through the single USB 3.0 port.
    Thank you! With that said, what should I use a hub for? It looks like a scrap for backups?
      My Computer


  6. Posts : 18,424
    Windows 11 Pro
       #6

    You use a hub if you don't have enough ports to plug everything into that you want to use. Also, don't waste your USB 3.0 ports (which will be blue) on stuff that doesn't need the speed like keyboard and mouse.
      My Computer


  7. Posts : 314
    Windows 10 Pro x64 Build 1803
    Thread Starter
       #7

    NavyLCDR said:
    You use a hub if you don't have enough ports to plug everything into that you want to use. Also, don't waste your USB 3.0 ports (which will be blue) on stuff that doesn't need the speed like keyboard and mouse.
    Great! So, if it is not good for transfers or backups, but if you are using multiple devices like a iPhone, iPad and maybe a printer, will it divide the speed as well?
      My Computer


  8. Posts : 18,424
    Windows 11 Pro
       #8

    mrje1 said:
    Great! So, if it is not good for transfers or backups, but if you are using multiple devices like a iPhone, iPad and maybe a printer, will it divide the speed as well?
    It will divide the speed up among the devices that are actually transferring data at the same time. Transferring photos from the iPhone will be at full speed, until you print something on the printer at the same time, then the data flow will be cut in half for only as long as data is flowing from the iPhone to the computer and from the computer to the printer. As soon as the document finishes sending to the printer, the iPhone speed will go back to 100%.

    Think of it as two lanes packed with traffic merging into one lane. Two cars can't travel down the single lane side by side, one car has to wait for the other car to go first.
      My Computer


  9. Posts : 314
    Windows 10 Pro x64 Build 1803
    Thread Starter
       #9

    NavyLCDR said:
    It will divide the speed up among the devices that are actually transferring data at the same time. Transferring photos from the iPhone will be at full speed, until you print something on the printer at the same time, then the data flow will be cut in half for only as long as data is flowing from the iPhone to the computer and from the computer to the printer. As soon as the document finishes sending to the printer, the iPhone speed will go back to 100%.

    Think of it as two lanes packed with traffic merging into one lane. Two cars can't travel down the single lane side by side, one car has to wait for the other car to go first.
    Thank you again. Understand now! Any workarounds when everything is working at once? Probably you would have to pick and choose if you want faster speed.
      My Computer


  10. Posts : 11,247
    Windows / Linux : Arch Linux
       #10

    Hi there

    Actually it's a bit more complex than that.

    There's NOTHING WRONG in using a USB3 hub -- provided it has enough power to drive the devices connected to it.

    Most USB3 HDD's (that's what most people use a USB 3 Hub for anyway) don't have anything like enough speed to limit the USB 3 hub speed -- as well as most I/O will be done reasonably well by Windows anyway. So even 2 or 3 devices will work just fine on a USB 3 Hub provided there is enough power supplied to the devices.

    You can probably connect 2 or even 3 USB 3 HDD's to a POWERED USB3 hub without too much reduction of speed or I/O transfer.

    Baring in mind that a typical USB 3 external drive (passport type of self powered variety) probably will only give up to 110 - 200- Mib/s on USB 3 port (Mib/s -- not MB/s) anyway you won't have any problem connecting another 2 or even 3 USB 3 devices to a decent USB 3 hub, It needs to be powered of course for maximum performance.

    As for USB 3 expansion port cards on older MOBOS that never had native USB 3 ports -- IMO they are usually a waste of time since they connect to the BUS which doesn't have USB 3 speed in the first place.

    If you need proper USB 3 speed then simply resign yourself to the fact that you'll have to upgrade your Mobo - moden laptops though have decent USB 3 ports.

    Cheers
    jimbo
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 20:26.
Find Us




Windows 10 Forums