1. Join Date : Sep 2015
    Posts : 14
    Windows 10 Enterprise
       19 Oct 2016 #1

    Not able to format 512GB Crucial MX100 (SDD#1)


    October 2016

    Hi everybody,
    Like I say in the topic I can’t format my SSD#1 Crucial MX100 512GB.
    Here what I try. Thanks.

    Operating System: Windows 10 full updated (October 2016)
    Computer: Asus Maximus Formula (buy at 2008)
    BIOS: Legacy BIOS (mean no UEFI - Unified Extensible Firmware Interface)

    BIOS and Windows 10 recognized the SDD#1.

    ----------------------------------------------------------------------------------
    1- I try Disk Management to format the SDD#1.
    One with “Quick format” option check and one with “Quick format” uncheck.

    Same result for both:
    The windows message received:
    “Virtual Disk Manager” (title of the windows showing the message)
    The format did not complete successfully (the message)
    ----------------------------------------------------------------------------------
    2- For this step I just connect the SDD#1 and the CDROM
    I try to boot from Windows 10 DVD installation, choose “Install” and Windows is not able to delete the partition on the SDD#1. It is not able to create a partition neither. And sure it’s not able to install Windows 10 on the SDD#1.
    ----------------------------------------------------------------------------------
    3- For this step I just connect the SDD#1 and the CDROM
    I try to boot from Windows 10 DVD installation, choose “Repair”, go in command prompt and do the following:

    Diskpart
    List disk
    List volume

    Select disk 0
    Select volume 1
    Clean

    Message received:
    DiskPart has encountered an error: The request could not be performed because of an I/O device error. See the System Event Log for more information.
    ----------------------------------------------------------------------------------
    4- For this step I connect all my SDD#1 and HDD and put the SDD#1 on other port.
    I go to CMD and enter the same command than above for same result.
    This time I can check the Event Viewer:

    Event Viewer
    464 Error and 1 Warning

    Warning
    Event Properties - Event 153, disk
    The IO operation at logical block address 0x0 for Disk 2 (PDO name: \Device\0000002a) was retried.

    Errors (repeat the following errors 232 time ? - I don't check all but it appear to be same two errors)
    Event Properties - Event 24620, BitLocker Driver
    Encrypted volume check: Volume information on \\?\Volume{01128aa1-0000-0000-007e-000000000000} cannot be read.

    Event Properties - Event 7, disk
    The device, \Device\Harddisk2\DR2, has a bad block.
    ----------------------------------------------------------------------------------
    5- I try the free program “ MiniTool Partition Wizard Free Edition 9.1” and nothing work. Not able to delete partion not able to create one.
    ----------------------------------------------------------------------------------
    6- I try GParted under XUbuntu and it’s not work too.
    ----------------------------------------------------------------------------------

    I am very sad. I do not have $ 200 for buying another SSD.
    Are there something to do to format the SSD # 1?
    I can’t believe it's broken. I have hard disks (trays) much older than it and that still works

      My System SpecsSystem Spec


  2. Join Date : Jun 2016
    Los Angeles
    Posts : 359
    Windows 10 Pro
       19 Oct 2016 #2

    The SSD may have failed, First try updating the Firmware Crucial SSD Firmware Updates
    Then download Crystal DiskInfo to tell you more about the Health of the SSD
    If all else fails, post to the Crucial Forum for Better Results
    And contact Crucial tech support for further inquiry
      My System SpecsSystem Spec


 


Similar Threads
Thread Forum
Samsung 950 PRO 512GB M.2 NVMe not recognised after installing windows
Hello everyone, I have encountered a problem with Samsung 950 PRO 512GB M.2 NVMe. I would appreciate your help as my knowledge in hardware and software is minimal. So thank you in advance. I have just finished installing windows 10 in a new pc...
Drivers and Hardware
Solved Cloning HDD to SSD-HDD is 512 format & SSD is 4096 format. Matter?
If so, what are my options? This HDD came from HP w/Win 7. I upgraded it to Win 10 but would like to clone it to the SSD for the speed increase. Thanks in advance, jeff
Installation and Setup
Crucial 500gb SSD Momentum cache
Hi, I have downloaded crucial executive for my SSD and on one page there is a button to enable the drives momentum cache. Also on this page is a warning that my PC is not battery backuped so enabling momentum cache is at my own risk. I backup my SSD...
Drivers and Hardware
Crucial 128GB m4 2.5 SSD freeze after 1 hour. please help
Hello. I just registered on this forum in hope for some help. Posted on other forums aswell, but noone has managed to find an sollution. I built my new pc a few days ago. Installed windows 7 on it and ran memory test and tests on all the disks....
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 23:00.
Find Us
Twitter Facebook Google+



Windows 10 Forums