1.    2 Weeks Ago #1
    Join Date : Oct 2016
    Posts : 9
    Windows 10 Home 64-bit

    IT9135 BDA DVB-T dongle stopped working after some windows updates

    Hi guys.
    I'm here because I've heard a lot about the experts in tenforums so I decided to ask my problem here. I have a HP ENVY 15t-j000 laptop running the latest windows 10 edition which is 1607. Since I've upgraded to anniversary update I have a lot of problems and many errors in the event viewer but above all my biggest problem is with my DVB-T dongle which stopped working suddenly. I was using the dongle before anniversary update with no problem but after the update it started to malfunction. First, for a few times when I started up my system and plugged the dongle into usb port I saw the error on totalmedia software which said no hardware detected. For about 5 or 6 times I could resolve the issue by closing the software, unplugging the dongle, plugging again and opening the software. With this simple approach I could use the DVB-T dongle but suddenly one day it didn't treat the same way and the issue wasn't resolved. I've done a lot of things like uninstalling and installing the driver or opening another user account and some other stuff to resolve the issue but no luck. I have a lot of errors in event viewer and I don't know if they are related to this problem or not. I remember some changes to the system before this problem occurs but I don't know which was exactly before this problem so I mention all of them. In the period of 15 days before this problem I've done these things:
    • updating bios driver manually by downloading the latest driver for my system from the HP
    • uninstalling and installing some different drivers for the sound a lot of times (because I had problem with IDT High definition codec driver and I couldn't switch between sound outputs in windows 10 and the sound was a little distorted, so I was struggling with the sound driver and finally I chose the windows generic driver though I can't still switch between sound outputs and the speaker volume is too low but at least I have clear sound through my headphone)
    • performing some windows updates however I must mention that one of the updates didn't downloaded and was stuck in downloading so I downloaded it from microsoft update catalog and installed manually. ( I haven't updated my windows to the KB3194496 yet)
    • updating some drivers of different devices through device manager

    If I want to give you more details about my problem I can say that I've tested some softwares for DVB-T like Dvbviewer and Sichbopvr. These softwares shows that they have detected the device and I can see the name of my device but when I want to scan for channels it shows me the error of "No hardware, No device detected or the device is being used by another software". It's very strange that they see my device but can not use it or access it. The problem is not with the device because I can use it on my android tablet without any problem. I've also tried sfc/ scannow and dism and clean boot but non of them resolved my issue. So if anyone can help me to resolve the issue I will be very grateful.
    Thanks for your support.
    Last edited by Omidz 10; 2 Weeks Ago at 05:02.
      My System SpecsSystem Spec

  2.    2 Weeks Ago #2
    Join Date : Oct 2016
    Posts : 9
    Windows 10 Home 64-bit

    I've found this error in the event viewer that is related to this problem:

    Driver install failed, result=0x80070422 for devnode 'USB\VID_048D&PID_9006&MI_00\6&23C601F2&0&0000'

    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Microsoft-Windows-DeviceSetupManager" Guid="{FCBB06BB-6A2A-46E3-ABAA-246CB4E508B2}" />







    <TimeCreated SystemTime="2016-10-08T15:30:06.875089000Z" />


    <Correlation />

    <Execution ProcessID="796" ThreadID="2040" />



    <Security UserID="S-1-5-18" />


    - <EventData>
    <Data Name="Prop_DevnodeId">USB\VID_048D&PID_9006&MI_00\6&23C601F2&0&0000</Data>

    <Data Name="HRESULT">2147943458</Data>



    that usb name in the error is the IT9135 driver.

      My System SpecsSystem Spec


Similar Threads
Thread Forum
My windows 10 has stopped working
Hello I have a Teclast X2 Pro with Win 10 Teclast X2 Pro Review - A Powerful Surface Clone Now it has stopped working, it takes forever to log in and everything just freezes after just a couple of minutes. I have tried to format my drive...
General Support
windows 10 stopped working
I have gone back to windows 7 and will not go back to windows 10 , I have had nothing but problems with it for at least 3 weeks now , not sure what the last update edid but it screwed up my computer so I couldn't do anything on it , I couldn't...
General Support
Keyboard stopped working under Windows 10
I have an iMac dual booting Mac OSX and Windows 10 under Bootcamp. I have the normal iMac wireless keyboard. Windows has been running normally for several years since the day I got the computer. Windows 10 has been running normally since the...
Drivers and Hardware
Solved Windows Explorer stopped working
Recently discovered Windows Explorer stop working. Ran SFC /ScanNow result were some flies were repaired, which directed me to C:Window\Log\CBS\CBS.log, nothing found there. I have no idea what to do, it was only by accident I discovered it was not...
General Support
Teamviewer stopped working after last nights win10 updates
I Tried to connect to my 2 other PCs this morning. I just get a screen where it says it's 'Initialising Display parameters' but will not get past this screen. Was working perfectly yesterday! Oh and I can take control of these same computers...
Software and Apps
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 05:19.
Find Us
Twitter Facebook Google+

Windows 10 Forums