Add a device

Hi,
Add a device
How do I add a device (Scanner) to the Windows list of devices?
My scanner an Epson Perfection V500 Photo is working.
It is USB connected yet I can not find it in device manager.
It shows as not connected in:
Settings> Devices > Printers & scanners

Thanks
Frank C

How about going to Epson and downloading the latest driver for your scanner:
Epson Perfection V500 Photo, Drivers & Downloads - Technical Support - Epson America, Inc.

The link I provided is for the 64 bit driver...so, if you have a 32 bit OS, then you need to change it to the 32 bit driver. Hope this works for you.

Thanks play2mefish,
The driver is not my problem. The scanner works OK.
I want to get it added to the device list that windows 10 uses so I can investigate it's properties.
I can't seem to accomplish that.
Frank C

OK, try going through the old control panel and see if you can see it from there. Click Windows Key and the letter X, and then click on Control Panel (you probably already knew that...I just threw it in in case you didn't). If you don't see it there, then I would go download the correct driver and do a reinstall. I suspect even though it is working, it is using windows drivers and not Epson's, and that is why you can't see it in devices. Give it a shot and let us know. Thanks.

Thanks play2mefish
It did not show in the devices displayed by the old control panel.The driver link that you provide looks like it does every driver for the entire computer.
I don't want to do that. "If it ain't broke don't fix it."
I am willing to update the scanner driver.
If I look at Epson, the driver that they have is dated 7/22/2010 for my scanner perfection
It did not show in the devices displayed by the old control panel. The driver link that you provide looks like it does every driver for the entire computer.
I don't want to do that. "If it ain't broke don't fix it."
I am willing to update the scanner driver.
If I look at Epson, the driver that they have is dated 7/22/2010 for my scanner Perfection V500 Photo.
I don't know the file name of my current driver so I can't check the date.
Do you know the file name for Epson scanner drivers?
Thanks
Frank C500

I now have the Epson Perfection V500 showing in the
Control Panel > Hardware and Sound > Devices and printers

This is likely because I followed a suggestion to set services
as follows:
Device Association Service Manual (Trigger Start)
Device Install Service Manual (Trigger Start)
Device Management Enrollment Service Manual
Device Setup Manager Manual (Trigger Start)
DevQuery Background Discovery Broker Manual (Trigger Start)

I have lost track of the website that provided that information.

Also:
Settings > Devices > Printers and scanners no longer shows the Epson Perfection V 500 as disconnected.

I started this investigation because I was told by Epson that there was a way to set the file save location
in the properties of the Epson Perfection V500. This would allow using the Scan to PDF button to save the scan at the same location during a series of scans. I will look into that.
Frank C

My error.
The scanner showed up in Devices and printers because it was turned on.
Before, it did not show up because it was off.
The device settings probably did not affect it either way.