I uninstalled Microsoft AC Adapter Driver by accident, PC won't start.
-
I uninstalled Microsoft AC Adapter Driver by accident, PC won't start.
Oh boy, I followed some wrong advice and uninstalled my Microsoft AC Adapter Driver, (I know), now my laptop won't start.
This is the video that I followed: FIXED! Windows 10 Plugged In, Not Charging - YouTube
Absolutely nothing happens when I plug in the power source with or without battery, or just he battery alone.
I had no issues prior to being advised to remove my Microsoft AC Adapter drive, except for my battery saying it was not charging. The advice I received included removing Microsoft ACPI Compliant Control Method Battery ans well as the Microsoft AC Adapter drive.
Now I know it should have only been the Microsoft ACPI Compliant Control Method Battery.
The question is, how do i solve this? How do I get my laptop to boot up again so I can install my Microsoft AC Adapter drive? Bit of a chicken and the egg situation but desperate for a solution.
Laptop is Windows 10, upgraded from Win 7:
HP Pavilion 14 Notebook PC
Processor type: Intel (R) i5-4200u CPU@1.60Ghz
Memory 8GB
Any help would be greatly appreciated, thank you.
Last edited by johnlogan; 21 Jun 2016 at 14:13.
-
-
If you have an installation disc, either for Windows 7 or Windows 10, try booting off the CD if possible. Otherwise, if you have a different computer readily available that can connect to the internet, download a copy of Hirens, take the hard disk out of the PC and put in the other computer, write the Hirens ISO to a CD and boot off the CD. Then use the file manager to move all the important files to another hard disk. Once that's done, Open Partition Manager and delete the Partition, before reinstalling windows and all your programs. That's all that I could think of
-
When you say another PC, all i have is another laptop.
And how can i boot off the CD when my laptop won't power up?
This looks like i have a bigger problem than i suspected :-(
If you have an installation disc, either for Windows 7 or Windows 10, try booting off the CD if possible. Otherwise, if you have a different computer readily available that can connect to the internet, download a copy of Hirens, take the hard disk out of the PC and put in the other computer, write the Hirens ISO to a CD and boot off the CD. Then use the file manager to move all the important files to another hard disk. Once that's done, Open Partition Manager and delete the Partition, before reinstalling windows and all your programs. That's all that I could think of
-
-
Do you have the OEM Windows or Microsoft's "true-blue" retail version? You have already tried asking OEM Tech Support or MS Tech Support? I was hoping one of them would provide you info on how to re-download and re-install the now-missing driver set.
-
Try this:
Disconnect all power sources - AC and battery
Press and hold the power button for 2 full minutes
Connect AC power only
You should be able to power up. Windows might not start because of the accidental deletion of the AC adapter driver
but the machine should at least boot to firmware (BIOS)
If the box won't start at all, then I suspect a bad AC adapter - probably causing the charging issue as well.
HP has a recall on some adapters - the power cord is replaced free of charge on ones that qualify.
that's besides the point though
It's also possible that the AC connector on the board is faulty - not much you can do about that.
An easy connector test is to very gently wiggle it.
See where you get with those suggestions
-
Thank you, gave it a try following your tips but no change, still does not power up.
My power source never had a loose contact problem before. Really, all these problems started after deleting the AC adapter.
Any other suggestions?
###
Try this:
Disconnect all power sources - AC and battery
Press and hold the power button for 2 full minutes
Connect AC power only
You should be able to power up. Windows might not start because of the accidental deletion of the AC adapter driver
but the machine should at least boot to firmware (BIOS)
If the box won't start at all, then I suspect a bad AC adapter - probably causing the charging issue as well.
HP has a recall on some adapters - the power cord is replaced free of charge on ones that qualify.
that's besides the point though
It's also possible that the AC connector on the board is faulty - not much you can do about that.
An easy connector test is to very gently wiggle it.
See where you get with those suggestions
-
There's only two conclusions if your machine doesn't power up
The power source or connector is shot
Your mother board is shot
Unless ... you refer to Windows starting
When I say power up, I mean the hardware ... fans spin, lights light, disk drive spins
Regardless - I don't have any other ideas.
Good luck, if I think of anything, I'll post it.
Last edited by Slartybart; 21 Jun 2016 at 16:10.
-
This is the video that i followed.
FIXED! Windows 10 Plugged In, Not Charging - YouTube
There's only to conclusions if your machine doesn't power up
The power source or connector is shot
Your mother board is shot
Unless ... you refer to Windows starting
When I say power up, I mean the hardware ... fans spin, lights light, disk drive spins
Regardless - I don't have any other ideas.
Good luck, if I think of anything, I'll post it.
-
-
The drivers removed in windows 10 have ZERO effect on the laptop when it is first booting, period.
What slatybart posted about the hardware booting up is fact.
Coincidental, but removing them didn't cause this issue of not powering up.
-
So you're saying, if I understand you correctly, that a perfectly working laptop (apart from the battery displaying as not charging), which stopped working at the very moment I removed the AC Adapter, has nothing to do with that fact, and that's it's a pure coincidence and either my power source or motherboard is dead?
The drivers removed in windows 10 have ZERO effect on the laptop when it is first booting, period.
What slatybart posted about the hardware booting up is fact.
Coincidental, but removing them didn't cause this issue of not powering up.