New
#31
I don't know if you tested the PSU in isolation or connected to your motherboard. If the former, then the PSU may not be dead. It's normal to see only the +5V standby output if you test the PSU with nothing else connected. The PSU is turned on by the motherboard or power switch issuing the Power On signal to the PSU. Your PSU won't turn on and output all voltages unless it sees the Power On signal. You can simulate this by the paper clip test - see http://support.antec.com/support/sol...paperclip-test
Once those connections are shorted with the paper clip then the PSU should power up and you will be able to measure the voltages as shown in the link. Note some PSUs need a load to power on but I've tried this test with XFX, EVGA & Corsair PSUs and it works.