1. Joined : Dec 2015
    Posts : 4
    Windows 10 home
       11 Oct 2016 #1

    BSOD Memory_management


    I have had periodic BSODs on this PC, perhaps every 30 days. Usually irql_not_less_or_equal

    This is a new cause.

    I have tested the memory previously with no errors reported.

    I have (hopefully) attached the report below.

    Thanks for any assistance.
    BSOD Memory_management Attached Files
      My System SpecsSystem Spec


  2. Joined : Apr 2014
    Space coast of Florida
    Posts : 4,062
    Windows 10 Pro X64 14393.105
       12 Oct 2016 #2

    Dump indicates a problem with your video card or driver:
    Code:
    ffffcb80`cb9722a8  fffff804`cd956385Unable to load image nvlddmkm.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for nvlddmkm.sys
    *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
     nvlddmkm+0x156385
    I suggest completely uninstalling the Nvidia display drivers using Display Driver Uninstaller (DDU) from WagnardMobile (near bottom of page) then get the latest driver for you Nvidia card here: NVIDIA Driver Downloads
    Currently 373.06.

    Then do a custom install of only the NVidia graphics driver and the PhysX driver.

    See if that gets rid of the problem.
      My System SpecsSystem Spec


  3. Joined : Dec 2015
    Posts : 4
    Windows 10 home
       13 Oct 2016 #3

    Thanks Ztruker,

    I updated the Nvidia drivers as you recommended. Hopefully it will work.

    My crashes have been every few weeks, so it will take time to see if success has been achieved.
      My System SpecsSystem Spec


  4. Joined : Dec 2015
    Posts : 4
    Windows 10 home
       16 Oct 2016 #4

    Hi, updating the Nvidia drivers did not work.

    See latest crash report.
    BSOD Memory_management Attached Files
      My System SpecsSystem Spec


  5. Joined : Apr 2014
    Space coast of Florida
    Posts : 4,062
    Windows 10 Pro X64 14393.105
       17 Oct 2016 #5

    Not seeing anything useful in the dump. Video driver looks good, latest version available.

    Let's try a couple things. 1st run with Driver Verifier enabled. If that doesn't show us anything then test your ram.

    ===================================================
    Driver Verifier
    is a diagnostic tool built into Windows 10, it is designed to verify both native Microsoft drivers and third party drivers. Driver Verifier's verification process involves putting heavy stress on drivers with the intention of making bad, outdated, incompatible or misbehaving drivers fail. The required result is a BSOD (Blue Screen of Death) which will generate a crash dump for debugging purposes.
    Machines exposed to Driver Verifier will run very sluggishly due to the stress being applied to the drivers.

    Driver Verifier - Enable and Disable in Windows 10

    Pay close attention to
    PART TWO
    and make sure the correct boxes are checked.

    Warning:
    It is not advised to run Driver Verifier for more than 48 hours at a time. Disable Driver Verifier after 48 hours or after receiving a BSOD, whichever happens soonest.

    Always create a Restore Point prior to enabling Driver Verifier.

    What we're looking for is a BSOD with a mini dump that will tell us what driver caused it.

    ===================================================
    RAM:

    Follow this tutorial: MemTest86+ - Test RAM - Windows 10 Forums

    information   Information

    MemTest86+ is a diagnostic tool designed to test Random Access Memory (RAM) for faults. MemTest86+ will verify that:

    • RAM will accept and keep random patterns of data sent to it
    • There are no errors when different parts of memory try to interact
    • There are no conflicts between memory addresses


    Memtest86+ runs from bootable media to isolate the RAM from the system, no other components are taken into account during the test.

    warning   Warning
    MemTest86+ needs to run for at least 8 passes to be anywhere near conclusive, anything less will not give a complete analysis of the RAM.


    If you are asked to run MemTest86+ by a Ten Forums member make sure you run the full 8 passes for conclusive results. If you run less than 8 passes you will be asked to run it again.

    Note   Note
    MemTest86+ has been known to discover errors in RAM in later passes than the eighth pass. This is for information only; if you feel there is a definite problem with the RAM and 8 passes have shown no errors feel free to continue for longer.


    Running 8 passes of MemTest86+ is a long and drawn out exercise and the more RAM you have the longer it will take. It's recommended to run MemTest86+ just before you go to bed and leave it overnight.
      My System SpecsSystem Spec


 


Similar Threads
Thread Forum
Solved BSOD MEMORY_MANAGEMENT randomly throughout day
Hello, I am getting a BSOD at somewhat random points throughout the day when using my computer. It doesn't seem to occur when I do a particular task and I haven't been stressing the computer at all, just general internet browsing and editing word...
BSOD Crashes and Debugging
Solved Memory_management bsod
Hello, I've recently started getting MEMORY_MANAGEMENT BSODs. It feels like it happens anytime my PC starts using more RAM (>6gb) which with everything running happens pretty much after starting all programs I normally use. It might...
BSOD Crashes and Debugging
BSOD Thread_stuck and Memory_management
So I have been having unpredictable BSODs. At first I thought it was just drivers, so I tried multiple video driver versions and tried updating all my motherboard drivers, including my BIOS. I then tried using an old HD 7870 to see if it would solve...
BSOD Crashes and Debugging
Solved BSOD Memory_Management
Good evening, I've build a new PC with following hardware: i5 6500 AMD R9 380x (PowerColor) AsRock H170 Pro4 Gskill 16 GB Kit F4-240015D Thermaltake 530 W
BSOD Crashes and Debugging
Solved Memory_management bsod
First BSOD after a while of running fine. This is a new build PC with a clean install of Windows 10. It crashed a lot after installation, then settled down. Today, I'm running a download installer for 9.5GBytes of graphics applications and data....
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:40.
Find Us
Twitter Facebook Google+



Windows 10 Forums