Multple BSODs on WAKE from SLEEP

mco · 04 Jul 2016

You are correct. Typo on my part. I ran chkdsk c: /r without any errors.

axe0 · 04 Jul 2016

Please upload the chkdsk log

Chkdsk Log in Event Viewer - Read in Windows 10 - Windows 10 Forums

mco · 04 Jul 2016

Here are the chkdsk c: /r results as you requested.:)

axe0 · 04 Jul 2016

This is a bit of a standard thing, but many recommend to run the chkdsk command a few times, so do I. Running it multiple times affects the file system in a positive way :)

mco · 06 Jul 2016

Another crash. Bugcheck 0xa. Attached is latest dm_log_collector. I will start running verifier to try and track down the driver. I have not had much luck with this process.

axe0 · 06 Jul 2016

Please check the settings of driver verifier, the dump shows that it is not proper.

Code:

Verify Flags Level 0x00000000

  STANDARD FLAGS:
    [X] (0x00000000) Automatic Checks
    [ ] (0x00000001) Special pool
    [ ] (0x00000002) Force IRQL checking
    [ ] (0x00000008) Pool tracking
    [ ] (0x00000010) I/O verification
    [ ] (0x00000020) Deadlock detection
    [ ] (0x00000080) DMA checking
    [ ] (0x00000100) Security checks
    [ ] (0x00000800) Miscellaneous checks
    [ ] (0x00020000) DDI compliance checking

  ADDITIONAL FLAGS:
    [ ] (0x00000004) Randomized low resources simulation
    [ ] (0x00000200) Force pending I/O requests
    [ ] (0x00000400) IRP logging
    [ ] (0x00002000) Invariant MDL checking for stack
    [ ] (0x00004000) Invariant MDL checking for driver
    [ ] (0x00008000) Power framework delay fuzzing
    [ ] (0x00010000) Port/miniport interface checking
    [ ] (0x00040000) Systematic low resources simulation
    [ ] (0x00080000) DDI compliance checking (additional)
    [ ] (0x00200000) NDIS/WIFI verification
    [ ] (0x00800000) Kernel synchronization delay fuzzing
    [ ] (0x01000000) VM switch verification
    [ ] (0x02000000) Code integrity checks

    [X] Indicates flag is enabled

mco · 06 Jul 2016

I haven't started verifier yet. But I did try sfc /scannow and dism /online /update_image /restorehealth both failed. Log files are attached.

Normally when this happens I just do a clean install and start over.

I'll wait this time on your suggestion.

Thanks.

axe0 · 06 Jul 2016

Please read this post, download the tool and download the setup media.
Run the tool as admin and choose option 3 after the download of the setup media is done and the setup media is mounted.

mco · 06 Jul 2016

I set up verifier. The system would boot and I could login. But when I tried to bring up anything, windows explorer, notifications, .... the system would reboot.

But no crash logs were created. I had to disable verifier from safe mode. (That usually doesn't happen).

I will follow your suggestion about SFC and DISM and let you know how everything works out.

mco · 06 Jul 2016

The ImageHealth link is no longer available.