BSOD's too many to count!!

Hi,
this issue started when i installed a graphics card on windows seven and is probably driver related.
originally i would regularly get "irql equal to or less" but that seemed to only happen on certain things like itv player and some games.
i took out the graphics and deleted the graphics drivers to install the onboard drivers but still had the same issue.
the last week i have had bsod on many things here are some of them:

driver overran stack buffer
system pte misuse
memory management
Edit : system service exception
another one: k mode exception not handled (this was while on desktop not dong anything).

some restarts say about an overclock failure other times it wont restart at all.

any help would be great,
thanks.
Attachment 84122

Please remove all overclocking back to stock!

Please run CPU-Z | Softwares | CPUID, open it and make screenshots of the following tabs

• CPU
• Mainboard
• Memory
• SPD*
• Graphics

*SPD shows the details of each module, you can show the details by choosing different slots in the left upper corner.
Please make screenshots of each module.

Please post each screenshot in your next reply/replies.

Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

   Note

MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.

Diagnostics Test

 HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run following tests

1. Short Drive Self Test
2. Short generic
3. Long generic

If the short generic fails, no need for the long generic.

   Note

Do not run SeaTools on an SSD as the results will be invalid.

Post screenshots/photos of the test results

Run chkdsk
Disk Check - Windows 7 Help Forums
Upload the chkdsk log Chkdsk Log in Event Viewer - Read in Windows 10 - Windows 10 Forums

Run HDTune to

• scan for errors, no quick scan but full scan
• check the health,
• benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the error scan,
• the health,
• the benchmark incl. following
  
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

There are many crashes related to memory corruption and/or possible NTFS corruption, we'll need to rule out the memory and hard drive properly first

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff8002598a786, ffffd000ec9bc980, 0}

Probably caused by : NTFS.sys ( NTFS!NtfsFsdCreate+16 )

Followup:     MachineOwner


1: kd> !devobj ffffe001bac62060
Device object (ffffe001bac62060) is for:
 InfoMask field not found for _OBJECT_HEADER at ffffe001bac62030
 \FileSystem\Npfs DriverObject ffffe001bac38470
Current Irp 00000000 RefCount 118 Type 00000011 Flags 00000240
Dacl ffffc10221b6ce71 DevExt ffffe001bac621b0 DevObjExt ffffe001bac62380 
ExtensionFlags (0x00000800)  DOE_DEFAULT_SD_PRESENT
Characteristics (0x00020000)  FILE_DEVICE_ALLOW_APPCONTAINER_TRAVERSAL
AttachedDevice (Upper) ffffe001bb7acdf0 \FileSystem\FltMgr
Device queue is not busy.


CHKIMG_EXTENSION: !chkimg -lo 50 -db !Npfs
157 errors : !Npfs (fffff801120e3b2c-fffff801120e3c29)
fffff801120e3b20  60  ab  00  00  8e  ae  00  00  e8  3a  00  00 *00 *00 *00  00 `........:......
fffff801120e3b30 *00 *00  00 *00 *00 *00 *00  00 *00 *00 *00 *00 *00 *00 *00  00 ................
fffff801120e3b40 *00 *00 *00 *00 *00 *00 *00 *00 *00 *00  00  00 *00 *00 *00  00 ................
fffff801120e3b50 *00 *00 *00  00 *00 *00 *00  00 *00 *00 *00  00 *00 *00 *00  00 ................
fffff801120e3b60 *00 *00  00  00 *00 *00  00  00 *00 *00  00  00 *00  00 *00  00 ................
fffff801120e3b70 *00 *00  00 *00 *00 *00  00  00 *00 *00  00  00 *00 *00  00  00 ................
fffff801120e3b80 *00  00 *00  00  00 *00 *00  00  00 *00 *00  00  00 *00 *00  00 ................
fffff801120e3b90  00 *00 *00  00 *00 *00  00  00 *00 *00  00  00 *00 *00  00  00 ................
fffff801120e3ba0 *00  00  00  00 *00 *00  00  00 *00 *00  00  00 *00 *00  00  00 ................
fffff801120e3bb0 *00  00 *00  00  00 *00 *00  00  00 *00 *00  00  00 *00 *00  00 ................
fffff801120e3bc0  00 *00 *00  00 *00 *00  00  00 *00 *00  00  00 *00 *00  00  00 ................
fffff801120e3bd0 *00 *00 *00  00 *00 *00 *00 *00 *00 *00 *00 *00 *00 *00 *00 *00 ................
fffff801120e3be0 *00 *00 *00 *00 *00 *00 *00 *00 *00 *00  00  00 *00  00  00  00 ................
fffff801120e3bf0 *00 *00  00  00 *00 *00  00  00 *00  00  00  00 *00 *00  00  00 ................
fffff801120e3c00 *00  00  00  00 *00 *00  00  00 *00 *00  00  00 *00 *00  00  00 ................
fffff801120e3c10 *00 *00 *00  00 *00 *00 *00  00 *00 *00 *00 *00 *00 *00 *00  00 ................
fffff801120e3c20 *00 *00 *00  00 *00 *00  00  00 *00 *00  00  00  10  3c  00  00 .............<..


MODULE_NAME: memory_corruption

IMAGE_NAME:  memory_corruption

FOLLOWUP_NAME:  memory_corruption

DEBUG_FLR_IMAGE_TIMESTAMP:  0

MEMORY_CORRUPTOR:  LARGE_256

FAILURE_BUCKET_ID:  MEMORY_CORRUPTION_LARGE_256

BUCKET_ID:  MEMORY_CORRUPTION_LARGE_256

PRIMARY_PROBLEM_CLASS:  MEMORY_CORRUPTION_LARGE_256

Please fill in your system specs

Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.

How to fill in your system specs:

Could you please check the frequency of your CPU, GPU & RAM in the BIOS and post them here so it can be checked :)

Please boot in the BIOS and make sure the optimal default settings are loaded.