I Recently got Xcom 2 and while playing it i got a restart and when i was playing it again i got a BSOD, Any suggestions in whats going on? No other game causes any trouble. Just this one.Attachment 82168
hal.dll+35f1f and ntoskrnl.dll seem to be a problem i have no idea really
Last edited by StarOfDeath; 28 May 2016 at 16:29. Reason: More info
Hi StarOfDeath,
Welcome to the 10forums :)
Please remove 1 of the 2 models of your memory, running mixed memory can cause many problems.
Code:[Memory Device (Type 17) - Length 34 - Handle 0032h] Physical Memory Array Handle 002ch Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 4096MB Form Factor 09h - DIMM Device Set [None] Device Locator Node0_Dimm2 Bank Locator Node0_Bank0 Memory Type 18h - Specification Reserved Type Detail 4080h - Synchronous Speed 800MHz Manufacturer Kingston Serial Number Asset Tag Number Part Number KHX1600C9D3/4 [Memory Device (Type 17) - Length 34 - Handle 0034h] Physical Memory Array Handle 002ch Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 4096MB Form Factor 09h - DIMM Device Set [None] Device Locator Node0_Dimm3 Bank Locator Node0_Bank0 Memory Type 18h - Specification Reserved Type Detail 4080h - Synchronous Speed 800MHz Manufacturer Kingston Serial Number Asset Tag Number Part Number KHX1600C10D3/
Did and same problem. it isnt ram related. like i said the problem only occurs and just only when playing Xcom 2 no other game does anything nor any program its just that game which i dont know why maybe heat? i have no idea but ram isnt the problem i tried both models separately and they work just fine the same as together but thanks!
i think it is heat related on the cpu its quite hot in here these days and i also open the side panel of my CPU and it appears to stop giving me the BSOD so maybe thats the problem, i will just clean my pc from dust and close the panel to see if thats the problem i think it is
Please note that the memory was only a suggestion from a BSOD that can be difficult to diagnose.
The 0x124 is in most cases referred as a hardware error because of WHEA, Windows Hardware Error Architecture, that gets the message from the CPU that a hardware error has occured. Though a hardware error report can occur due to overclocking, overheating, improper cooling, improper seating, incompatibility, hardware failure, drivers and even software.
I see . I made all cooling possible and removed all dust I'm still getting the same problem so it's not heat related ram isn't it gpu isn't it cpu not sure I would guess no i mean everything works fine except for that game
Please provide a new zip from the DM Log Collector for analysis, I cannot help properly without new data when another BSOD has occured.
Ok so i tested gpu, cpu and memory it appears that the same happens but i found one thing while i was using prime95 my pc froze and on a worker gave me 1 error i did it more than once and my pc froze everytime, i disabled turbo from my cpu and when i ran prime now it restarted. but while playing Xcom2 it stills gives me BSOD so maybe the cpu is faulty Attachment 82497 there are all the bsods i have had. While using prime however it does not give me any bsod i ran memtest and it did not gave me any problem. so prime is the only one making my pc freeze. Any ideas?
Prime95 stress tests the CPU and tests part of the memory too depending on what test you used in Prime95. If a worker gives errors then you should replace the CPU.
What memtest did you ran?
memtest86+ So the thing is that the cpu onlly fails at high stress so i guess i got a faulty cpu... i have never had any problems with anything or any game but xcom i guiess because it is poorly optimized it applies stress into my cpu until it reaches the faulty part, i guess the only thing is to test it. using another processor. mmhh. i got my 8350 no so long ago thats quite awful i will have to check warranty bad luck i guess :/
i used every single test on prime95 with the same results
Quote