Please run driver verifier per following instructions so we can see if that results in a driver. If it doesn't then we are looking for other problems which most often are hardware problems, but it can also be incompatibility or Windows problem (which is a bit rare)
Please make a backup
of your important files and get your rescue media or create one
Please create a restore point.
Please follow this tutorial to run driver verifier.
Some windows drivers are blamed in a few crashes, but that usually means that a 3rd party driver is actually the cause.
Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.
Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.
If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.
Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.
Please fill in your system specs
3: kd> !verifier
Verify Flags Level 0x000209bb
[X] (0x00000000) Automatic Checks
[X] (0x00000001) Special pool
[X] (0x00000002) Force IRQL checking
[X] (0x00000008) Pool tracking
[X] (0x00000010) I/O verification
[X] (0x00000020) Deadlock detection
[X] (0x00000080) DMA checking
[X] (0x00000100) Security checks
[X] (0x00000800) Miscellaneous checks
[X] (0x00020000) DDI compliance checking
[ ] (0x00000004) Randomized low resources simulation
[ ] (0x00000200) Force pending I/O requests
[ ] (0x00000400) IRP logging
[ ] (0x00002000) Invariant MDL checking for stack
[ ] (0x00004000) Invariant MDL checking for driver
[ ] (0x00008000) Power framework delay fuzzing
[ ] (0x00010000) Port/miniport interface checking
[ ] (0x00040000) Systematic low resources simulation
[ ] (0x00080000) DDI compliance checking (additional)
[ ] (0x00200000) NDIS/WIFI verification
[ ] (0x00800000) Kernel synchronization delay fuzzing
[ ] (0x01000000) VM switch verification
[ ] (0x02000000) Code integrity checks
[X] Indicates flag is enabled
Summary of All Verifier Statistics
Synch Executions 0x2ed30
Pool Allocations Attempted 0x54bc62
Pool Allocations Succeeded 0x54bc62
Pool Allocations Succeeded SpecialPool 0x54bc62
Pool Allocations With NO TAG 0x4
Pool Allocations Failed 0x0
Current paged pool allocations 0xfdaf for 02296FC2 bytes
Peak paged pool allocations 0xfe7b for 022CF3A8 bytes
Current nonpaged pool allocations 0xd845 for 0163F8C9 bytes
Peak nonpaged pool allocations 0xd9db for 017C6A43 bytes
fffff80392192520: Unable to get MiVisibleState
Please follow this tutorial
and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling system & other used stuff. Please note that the PSU, cooling system and other used stuff are NOT mentioned in the tool.
How to fill in your system specs: