Welcome to the 10forums
Please run MemTest86+ according to the instructions below and post a screenshot of the result.
With your amount of memory (16GB), it could take up to 20h or more to complete at least 8 passes straight.
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums
MemTest86+ needs to be run for at least 8 complete passes
for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero
errors here. Even a single error will indicate RAM failure.
Make a photo of the result and post it.
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.
Please run CPU-Z | Softwares | CPUID, open it and make screenshots of the following tabs
*SPD shows the details of each module, you can show the details by choosing different slots in the left upper corner.
Please make screenshots of each module.
Please post each screenshot in your next reply/replies.
Please fill in your system specs
Please follow this tutorial
and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including your PSU, cooling system & other used stuff. Please note that the PSU, cooling system and other used stuff are NOT mentioned in the tool.
How to fill in your system specs: