PFN_List_Corrupted

This is something entirely new I have never seen before.

Couple of things to note;

Despite the fact that it says it could be possibly memory corruption, I've ran memtest86 and there have been no issues reported with my ram. There is some weird driver issue in my PC.

I gave my PC for stress testing in a repair shop and all the results turned out fine, my only guess is that there could be some incompatibilities between hardware that my PC has and devices that I plug into it.

I believe all the information regarding my PC is in the dxdiag that's part of the zip file, unless more information is required I am willing to provide.

Now the devices that I plug into the PC are as follows;

• Razer Abyssus mouse without the Razor Synapse drivers.
• CM Storm Devastator Keyboard.
• LB-Link 300Mbps Wireless USB Adapter.
• Blue Yeti microphone.
• Audio-Technica ATH-AD500X headset plugged into the Yeti.
• Dell U2414H Ultrasharp Super Thin Bezel 24" LED IPS Monitor x2 into my 980Ti.

The keyboard generally is not recognized when I boot my PC up. A replug fixes the issue.

Extra that has nothing to do with BSODs but may be related to the drivers;

Furthermore, demanding games tend to crash to desktop abruptly without any error message.

Any help regarding the issue would be greatly appreciated.

Thank you in advance.

axe0 said:

Hi Nosco,

Welcome to the 10forums :)

Do you know how many passes have been completed when you ran MemTest86(+)?

Please update your the drivers of your USB devices, I see some error reports about USB drivers.
I won't post the error logs, it would be very unreadable.
Please check in device manager for a device with a yellow triangle.
Please make sure that the firmware of your SSD is up to date.

Hello axe0,

I've tried to run the new memtest86 but I am at a loss as the interface has changed due to a new version and I am not sure about which test I am supposed to run.

I've done the updates and my SSD firmware is up to date.

axe0 said:

That sounds like you used MemTest86, we recommend MemTest86+.

Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

   Note

MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.

Thank you, I will do that tonight and will report my findings in the near future.