Hallo everybody, first post on the forums. I had updated from win 7 to 10 several months ago and today I got my first BSODs. It happened two times in a row within an hour while I was playing on Pokerstars and running my usual set of programs. First it came with the "system_service_exception" message and then with the "critical_structure_corruption". I hope the info is enough for you expert guys to help me.
The first dump indicates PokerStars.exe as the cause. The 2nd dump does yield any useful information.
See if there is a newer version of Pokerstars.
DAEMON Tools Lite is old, 2012. Uninstall it unless you need it. If you do, get the latest version.
Noticed the chipset driver is old too, again 2012. Check the manufacturers web site for an updated version.
Fill out more of your System Specs:
See here: System Specs - Fill in at Ten Forums
Hi bebius,
Welcome to the 10forums.
I'd like to start with getting rid of stability problem possibilities and updating drivers to ensure outdated drivers won't cause any problem when running driver verifier. Why driver verifier is necessary is shown below in the code, to catch the driver that caused the modifications in the kernel code.
Please remove Daemon tools, its drivers are improper coded and thus causing BSOD's since a long time.
Please remove AMD Overdrive, a known BSOD cause.
If you have used KMSpico, remove Office & KMSpico, else just remove KMSpico.
Please update the drivers of your Logitech devices (webcam, keyboard and/or mouse).
Please update the Realtek audio driver
GIGABYTE - Moederbord - Socket AM3+ - GA-990XA-UD3 (rev. 1.x)
Once all above has been updated/removed, please run driver verifier according to below instructions
Warning
Please make a backup of your important files and get your rescue media or create one.
Please create a restore point.
Please follow this tutorial to run driver verifier.
Some windows drivers are blamed in a few crashes, but that usually means that a 3rd party driver is actually the cause.
Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.
Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.
If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.
Note
Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.
Code:******************************************************************************** * * Bugcheck Analysis * * * ******************************************************************************* CRITICAL_STRUCTURE_CORRUPTION (109) This bugcheck is generated when the kernel detects that critical kernel code or data have been corrupted. There are generally three causes for a corruption: 1) A driver has inadvertently or deliberately modified critical kernel code or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx 2) A developer attempted to set a normal kernel breakpoint using a kernel debugger that was not attached when the system was booted. Normal breakpoints, "bp", can only be set if the debugger is attached at boot time. Hardware breakpoints, "ba", can be set at any time. 3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data. Arguments: Arg1: a3a01f59cdc489ae, Reserved Arg2: b3b72be020461b7b, Reserved Arg3: 0000000000000006, Failure type dependent information Arg4: 0000000000000018, Type of corrupted region, can be 18 : Kernel notification callout modification
Quote