You've read my post right? The answer is in my post
How long should I leave DV enabled for?
This isn't really good news
3/4 crashes didn't catch a driver, this would mean hardware problems.
The catched driver in the other crash is Driver Reference Table - IOMap64.sys
The problem is that usually most of the hardware problems aren't recognized through the dumps, that is called 'unknown hardware problems'.
We can try some software tests to see if they show anything.
The downside is that software isn't always 100% correct, this means that even if the test results are good the components could still cause problems. The best way to find out if a component is causing problems is to temporary replace and test. I am however still suggesting these tests as they usually do find the problem.
Run Prime95 and/or IntelBurnTest to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums CPU - Stress Test Using IntelBurnTest - Windows 7 Help Forums
If you're overclocking anything, please stop it and set everything back to default while troubleshooting
Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run following tests
- Short Drive Self Test
- Short generic
- Long generic
If the short generic fails, no need for the long generic.
Do not run SeaTools on an SSD as the results will be invalid.
Disk Check - Windows 7 Help Forums
Run HDTune to
- scan for errors, no quick scan but full scan
- check the health,
It may take some time, but please take the time you need to perform it properly.
Let me know what the results are
- of the error scan,
- make a screenshot of the health of every hard drive and post the screenshots,
- post screenshots with the benchmark of the
- transfer rate,
- access time,
- burst rate,
- cpu usage.
Run Furmark to test your GPU. Furmark tutorial
Run Furmark for around 30 minutes
Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high