Welcome to the 10forums.
It looks like most of the crashes are caused by a Xbox driver, if no Xbox device is connected when the crashes occur please proceed to the troubleshooting instructions below.
If any Xbox device is connected, please reinstall/update the drivers and/or disconnect it.
dc1-controller Xbox Peripherals Driver c:\windows\system32\drivers\dc1-controller.sys
11: kd> lmvm dc1_controller
start end module name
fffff800`43e00000 fffff800`43e17000 dc1_controller (pdb symbols) d:\symbols\dc1-controller.pdb\AE6D1540A3DC469998C9AF2C7036287E1\dc1-controller.pdb
Loaded symbol image file: dc1-controller.sys
Mapped memory image file: d:\symbols\dc1-controller.sys\5632DA1E17000\dc1-controller.sys
Image path: \SystemRoot\System32\drivers\dc1-controller.sys
Image name: dc1-controller.sys
Timestamp: Fri Oct 30 03:46:54 2015 (5632DA1E)
File version: 220.127.116.11
Product version: 18.104.22.168
File flags: 0 (Mask 3F)
File OS: 40004 NT Win32
File type: 3.7 Driver
File date: 00000000.00000000
CompanyName: Microsoft Corp.
ProductName: DC1 Controller KMDF driver
FileVersion: 22.214.171.124 (th2_release.151029-1700)
FileDescription: KMDF driver for DC1 Controller
LegalCopyright: Copyright (C) 2012 Microsoft Corp.
Even though you already tested the memory, please test it again according to the instructions below.
Read carefully before proceeding.
If you're overclocking your system, revert back to stock clocks now.
Test the system once the overclock is removed before continuing with the steps outlined below.
Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test
Run Prime95 and/or IntelBurnTest to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums & CPU - Stress Test Using IntelBurnTest - Windows 7 Help Forums
Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums
MemTest86+ needs to be run for at least 8 passes
for conclusive results. Set it running before you go to bed and leave it overnight. We're looking forzero
errors here. Even a single error will indicate RAM failure.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run following tests
- Short Drive Self Test
- Short generic
- Long generic
If the short generic fails, no need for the long generic.
Do not run SeaTools on an SSD as the results will be invalid.
Disk Check - Windows 7 Help Forums
Run HDTune to
- scan for errors, no quick scan but full scan
- check the health,
It may take some time, but please take the time you need to perform it properly.
Let me know what the results are
- of the error scan,
- make a screenshot of the health of every hard drive and post the screenshots,
- post screenshots with the benchmark of the
- transfer rate,
- access time,
- burst rate,
- cpu usage.
Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums
Run Furmark for around 30 minutes.
Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.