1.    03 Feb 2016 #1
    Join Date : Feb 2016
    Posts : 1
    Windows 10

    New build, daily BSOD

    Hi guys. I recently built a new computer and it's been giving me a lot of trouble. I get a crash that says whea uncorrectable error probably twice a day.

    Primarily I use the computer for gaming.

    I'm not sure if this is a problem I can correct myself or if there part is bad and needs to be replaced. Oddly, when booting the screen has a green tint to it when it should be black. As soon as Windows starts the green disappears and everything looks normal. Then bam, another crash.

    Any help would be greatly appreciated.
    New build, daily BSOD Attached Files
      My System SpecsSystem Spec

  2.    04 Feb 2016 #2
    Join Date : Jun 2015
    Posts : 10,461
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro

    The errors are 0x124 WHEA_UNCORRECTABLE_ERROR (Windows Hardware Error Architecture)
    This means that there are problems with your hardware, but this error is also caused by overclocking, faulty drivers or BIOS problems.
    Please make sure your BIOS is loaded for optimal default settings, or pull the cmos battery and put it back.

    New build, daily BSOD STOP 0x124 Troubleshooting New build, daily BSOD
    Read carefully before proceeding.

    warning   Warning
    If you're overclocking your system, revert back to stock clocks now.

    Note   Note
    Test the system once the overclock is removed before continuing with the steps outlined below.

    Part One: CPU Stress Test
    Part Two: MemTest86+ RAM Diagnostic
    Part Three: Hard Drive Diagnostics
    Part Four: GPU Stress Test

    New build, daily BSOD ONE New build, daily BSOD

    Run Prime95 and/or IntelBurenTest to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums & CPU - Stress Test Using IntelBurnTest - Windows 7 Help Forums

    warning   Warning
    Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.

    New build, daily BSOD TWO New build, daily BSOD

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note

    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking forzero errors here. Even a single error will indicate RAM failure.

    New build, daily BSOD THREE New build, daily BSOD

    Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
    Run following tests
    1. Short Drive Self Test
    2. Short generic
    3. Long generic

    If the short generic fails, no need for the long generic.

    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.

    Run chkdsk
    Disk Check - Windows 7 Help Forums

    Run HDTune to
    • scan for errors, no quick scan but full scan
    • check the health,
    • benchmark.

    It may take some time, but please take the time you need to perform it properly.
    Let me know what the results are
    • of the error scan,
    • make a screenshot of the health of every hard drive and post the screenshots,
    • post screenshots with the benchmark of the
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.

    New build, daily BSOD FOUR New build, daily BSOD

    Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums

    Note   Note
    Run Furmark for around 30 minutes.

    warning   Warning
    Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.
      My System SpecsSystem Spec


Similar Threads
Thread Forum
Average of 5-10 BSOD daily, please help
Hey there, I have had a problem with the BSOD that I've had for a while now and would love some help in regards to how I can get this to stop. I've got a feeling that it possibly started when I installed the Samsung 840 SSD Hard drive, I have...
BSOD Crashes and Debugging
daily BSOd(bad pool header) reboot after windows10 upgrade
Since upgrading from win 7 home premium to win 10, my computer seems to reboot daily. I have seen a 'bad pool header' message if the BSOD/reboot happens when I am working on the computer. I have used the DM Log collector to gather the information...
BSOD Crashes and Debugging
MULTIPLE BSOD's while Using laptop as a daily driver
I haven't been doing anything unusual and haven't installed anything recently, but all of a sudden I'm getting 2 to 3 BSOD's a day and it's driving me crazy. Right now anything I do needs to be saved almost every second. Below I have attached my...
BSOD Crashes and Debugging
Solved Multiple daily BSOD since Upgrade to Win10
Hi, I am losing my mind and have run out of places to check for help, so hoping someone here can assist: I installed Win 10 on 8/8. Since then receiving the same 2 BSOD multiple times every day, but no indication as to the cause. I have...
BSOD Crashes and Debugging
Daily BSOD
Almost daily BSOD after upgrade from Win 8.1 to Win 10. This is a different laptop than my other posts in this forum. ASUS 12 GB - see details in screenshot. Thanks!34300
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 11:50.
Find Us
Twitter Facebook Google+

Windows 10 Forums