When im playing dota2, i m running marvel heroes 2015 as well, then BSOD came up, the error message was WHEA_UNCORRECTABLE_ERROR. Attached is the file needed. Not sure why the dump file cant be uploaded. If its needed please let me know. Any help is appreciated.
Hi mascot1993,
Welcome to the 10forums.
I am very sorry for the delay.
There aren't many people here and I'm lately quite busy.
There was a write error in the level 0 cache.
This means, something was trying to write corrupted data to the CPU.
Please make sure your BIOS is loaded for optimal settings, in case needed tweak a little for stability.Code:3: kd> !errrec ffffe00066ee9028 =============================================================================== Common Platform Error Record @ ffffe00066ee9028 ------------------------------------------------------------------------------- Record Id : 01d11f64388b76a2 Severity : Fatal (1) Length : 928 Creator : Microsoft Notify Type : Machine Check Exception Timestamp : 11/15/2015 9:13:13 (UTC) Flags : 0x00000000 =============================================================================== Section 0 : Processor Generic ------------------------------------------------------------------------------- Descriptor @ ffffe00066ee90a8 Section @ ffffe00066ee9180 Offset : 344 Length : 192 Flags : 0x00000001 Primary Severity : Fatal Proc. Type : x86/x64 Instr. Set : x64 Error Type : Cache error Operation : Generic Flags : 0x00 Level : 0 CPU Version : 0x00000000000306c3 Processor ID : 0x0000000000000003 =============================================================================== Section 1 : x86/x64 Processor Specific ------------------------------------------------------------------------------- Descriptor @ ffffe00066ee90f0 Section @ ffffe00066ee9240 Offset : 536 Length : 128 Flags : 0x00000000 Severity : Fatal Local APIC Id : 0x0000000000000003 CPU Id : c3 06 03 00 00 08 10 03 - bf fb fa 7f ff fb eb bf 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 Proc. Info 0 @ ffffe00066ee9240 =============================================================================== Section 2 : x86/x64 MCA ------------------------------------------------------------------------------- Descriptor @ ffffe00066ee9138 Section @ ffffe00066ee92c0 Offset : 664 Length : 264 Flags : 0x00000000 Severity : Fatal Error : DCACHEL0_WR_ERR (Proc 3 Bank 1) Status : 0xbf80000000000124 Address : 0x000000010057f5c0 Misc. : 0x0000000000000086
If anything is overclocked, revert back to stock while troubleshooting.
Please check for the 3.3v, 5v, 12v, RAM frequency, RAM voltage in the BIOS.
Please check the temperatures of the CPU and GPU when idle and under load and let me know what they are.
Please make sure there is no dust inside your case, reseat what is possible to make sure everything is properly connected.
Please run the hardware tests below, there are many things that causes this crash because this crash isn't exactly clear about the cause.
Warning
If you're overclocking your system, revert back to stock clocks now.
Note
Test the system once the overclock is removed before continuing with the steps outlined below.
Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test
Run Prime95 to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums
Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.
MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking forzero errors here. Even a single error will indicate RAM failure.
Do not run SeaTools on an SSD as the results will be invalid.
Run Furmark for around 30 minutes.
Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.
Please let me know how it goes.
cpu temp shoot to around ~89c when testing with prime95. this is without OC, previously i put OC at 4.5ghz. The voltage in bios is all set into adaptive mode..
Around ~40c.. will do ram test tonight.
read online that v26.6 is the best to test my cpu. i use prime95 v26.6 and the temp max at about 78c, ambient around 30c and less.
Last edited by mascot1993; 18 Nov 2015 at 05:07.
accidently shut off my comp when the memtest86+ have run more than 5 pass last i seen. from the result of the 5 pass, theres seem to be no error.
may i ask if the error is more related to OC? or software if possible?
With a 0x124 it is hard to say what could be causing it, because this crash usually doesn't reveal enough for a specific cause.
Please make sure your BIOS is loaded for optimal settings, in case needed tweak a little for stability.
If anything is overclocked, revert back to stock while troubleshooting.
Please check for the 3.3v, 5v, 12v, RAM frequency, RAM voltage in the BIOS.
Please check the temperatures of the CPU and GPU when idle and under load and let me know what they are.
Please make sure there is no dust inside your case, reseat what is possible to make sure everything is properly connected.
Please run the hardware tests below, there are many things that causes this crash because this crash isn't exactly clear about the cause.
Thanks, im starting to guess this is related to my OC . since its only happened twice after i upgraded to window 10. both time was when i opening lots of programs..
Quote