1.    07 Nov 2015 #1
    Join Date : Nov 2015
    Posts : 2
    Windows 10 Enterprise 64x

    same BSOD multiple times (MEMORY_MANAGEMENT)

    Hi since i upgraded to windows 10 i have been getting this BSOD, i didnt get it before in windows 7.
    let me first say that my PSU is dieing, i will replace it when i get enough money saved up, i dont think that a MEMORY_MANAGEMENT bsod could be the cause of the PSU (correct me if i'm wrong), it cut the power a few times after that i decided to turn the overclock off and put it into power saving mode and installed windows 10.
    i got the same Bsod consistently 3 times in a row after opening a game(stalker) it crashed (more like closed from itself)
    and a little after that i got the BSOD (the game run just fine for a week and i reinstalled it freshly). the Bsod is consistently a MEMORY_MANAGEMENT 0x0000001a, caused by this adress: ntoskrnl.exe+14e2e0

    windows memory diagnostic tool finds no errors in my ram

    adding to PC specs:
    CPU: AMD Athlon 2 x4 630 default 2,8Ghz (OC was at 3.7Ghz, that ran fine for 2 years)
    Ram: 1x 4gb corsair vengence 1600mhz, 2x 2gb mushkin 1333mhz; all running at 1333 (could it be bad timings? edit: the timings they are 11,11,11,28)

    i have no idea what the issue could be, i will probably try to switch the ram in the slots and try to get the bsod again to see if the crash adress changes

    Edit1: checked the game crash log now and attached it

    Edit2: after i launch the game it consistently crashes with the same BSOD following after about a minute or less. this started happening after i defragmented the D drive where the game (only that game) is installed
    also last line in the game log is about "
    ntdll.dll" which looks similar to ntoskrnl.exe but is probably a completely diff thing
    and i will change the slow 11 11 11 28 ram timings to the spec timings which are 9 9 9 24 33.

    Edit3: fixed the game crash, i instaled the game into a folder named "Stalker - CoC & Ao3" and the "&" sing made a batch file not work properly, The batch file removes thumbs.db recursively found in gamedata directory. These are a byproduct of Windows and will cause XRay Engine to crash upon loading. Well no more BSOD from the game. But i suspect it was somthing more than that to cause it, the 9 9 9 24 33 timings are working fine, i had the slower ones because i had ram OC with the cpu via the bus speed. i would still like a conformation from the experts on the BSOD tho
    same BSOD multiple times (MEMORY_MANAGEMENT) Attached Files
    Last edited by sloW; 08 Nov 2015 at 11:37.
      My System SpecsSystem Spec

  2.    08 Nov 2015 #2
    Join Date : Nov 2015
    Posts : 2
    Windows 10 Enterprise 64x

    today i got 4 more BSOD, while mostly idle on desktop and one while writing this. 2 of them are "Memory_management" one is "reference_by_pointer" and last was "irql_not_less_or_equal". i noticed when checking in bluescreen viewer that they are apparently all caused by the same address "ntoskrnl.exe+14e2e0". So its not the games fault as i suspected, but i have no idea what it could be. i will attach an updated dmp log. thanks for any help in advance

    Edit: when checking something in cpu-z i noticed that bios somehow put the ram timings back to 11,11,11,28. i went into bios and noticed that it was auto setting it to those values, i made sure that i saved the correct timings and switched the 2 mushkin 2gb ram sticks around just to see that if the "caused by address" value will change when (if) the bsod reoccurs.

    SOLUTION: Ram timings were set wrong, works normal now
    same BSOD multiple times (MEMORY_MANAGEMENT) Attached Files
    Last edited by sloW; 08 Nov 2015 at 20:17.
      My System SpecsSystem Spec


Similar Threads
Thread Forum
BSOD BAD_POOL_HEADER Windows 10 Error Multiple times
I am using Dell 14R laptop, upgraded from windows 7 home premium 64bit to Windows 10 64bit I had done a hard reset and installed all software again from start. Every thing was nice but one day my laptop showed BSOD with BAD_POOL_HEADER error. I...
BSOD Crashes and Debugging
Lenovo Y50-70: recurring MEMORY_MANAGEMENT BSOD
Hello everyone! :) Iíve been experiencing daily recurring BSOD for quite some time now and no matter what Iíve tried in order to resolve the issue, Iíve not been able to track down the root cause of the problem. Those BSOD are almost always due to...
BSOD Crashes and Debugging
BSOD Memory_Management Issue (ntoskrnl.exe?)
Background: I did a fresh install of Windows 10 on a newly formatted ssd about 3 weeks ago. Everything seemed to run fine until about a week ago when I first got this BSOD. Over the past few days I have been getting it basically every day. I...
BSOD Crashes and Debugging
Solved Driver_power_state_failure and memory_management BSOD
I got a new laptop and after about a week I started to get the BSOD driver_power_state_failure. Sometimes it wouldn't happen for days and sometimes I'd get it 2-3 times a day. I ran whocrashed and the program said it was caused by the ntoskrnl.exe...
BSOD Crashes and Debugging
Getting BSOD multiple times a day, with various error messages
I just built my first computer a few weeks back and have been having a lot of BSOD issues. I'm currently running Windows 10 64 bit which I downloaded from Microsoft.com The BSOD seems to be happening at random times - turning the computer on,...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 01:13.
Find Us
Twitter Facebook Google+

Windows 10 Forums