New
#41
so tried running prime95. Both times the system froze within a minute. Didn't see the temp the first time but the last time it was about 40 degrees C. No BSOD so no logs available.
so tried running prime95. Both times the system froze within a minute. Didn't see the temp the first time but the last time it was about 40 degrees C. No BSOD so no logs available.
Was any other software in the background running besides of the temperature monitor software?
nothing that I know of
well apart from HWMonitor
just tried again. it literally freezes within seconds witin starting the prime95 test
For now, forget Prime95 and run the other tests.
Ruling out the rest specifies the cause more.
ok so ran furmark. after 20 or so mins the window seemed to disappear. Ran again and after about 15 mins the screen froze. Temp reading on frozen screen was 70 deg C. BSODs on reboot
Attachment 45227
trying to run memtest. followed the instructions but when I try to boot with the usb I get the message
"Missing operating system.
Reboot and Select proper Boot device
or Insert Boot Media in selected Boot device and press a key_"
Please open CPU-Z, make screenshots of the following tabs
- Mainboard,
- Memory,
- SPD,
- Graphics
and post the screenshots.
Please check Qualcomm or Atheros for driver updates for the Qualcomm Atheros wifi driver
Code:*** WARNING: Unable to verify timestamp for athw10x.sys *** ERROR: Module load completed but symbols could not be loaded for athw10x.sys 6: kd> lmvm athw10x start end module name fffff800`e4bf0000 fffff800`e5022000 athw10x T (no symbols) Loaded symbol image file: athw10x.sys Image path: athw10x.sys Image name: athw10x.sys Timestamp: Mon May 18 08:33:25 2015 (555987B5) CheckSum: 0042668C ImageSize: 00432000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
will do this evening.
downloaded memtest from memtest86.com and ran over night. pass complete no errors found