Going back to this, because the last crash was a read error.
Originally Posted by Kaiketsu
Can you recall how many passes were completed?
If not 8 passes, I suggest to run MemTest86+ again.
to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums
MemTest86+ needs to be run for at least 8 passes
for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero
errors here. Even a single error will indicate RAM failure.
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arg1: 0000000000000010, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff8012d2a2b18, address which referenced memory