1.    22 Sep 2015 #1
    Join Date : Sep 2015
    Posts : 1
    Windows 10

    hal.dll and ntoskrnl.exe BSOD only when gaming

    Hi Jordan here.

    I've recently been getting a lot of blue screens whilst gaming, this problem occurred when I was on Windows 7 too but I upgraded to 10 when I done a clean install of windows.
    I'm not really sure what is causing the problem.
    I've ran tests on my cpu, gpu, ram and hard drive and they all passed but I had my suspicion of it being the gpu as I tested an older card in my rig everything was fine. I contacted the store that sold me my gpu and after a lot of testing on my side they came to the conclusion it was my psu. It turns out it wasn't my psu because I've just bought a brand new one and I'm still getting BSOD.

    I have noticed that before the pc blue screens that my games will stutter and the fps will drop a reasonable amount and this only happens when gaming.

    It has blue screened on all of the games I play. GTA 5, CSGO, H1Z1 and a few others too.

    If anyone could help me find out what is causing this problem I would really appreciate it because I don't want to end up spending more money on things that I don't need to buy.

    Every thing you need to know about my system should be in the .zip I attached, if there's something missing that you need then please let me know.

      My System SpecsSystem Spec

  2.    23 Sep 2015 #2
    Join Date : Jul 2014
    Posts : 73
    Windows Embedded 8.1 Industry Pro

    Hi Jordan & Welcome to the forums ^_^,

    I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-
    7: kd> !errrec ffffe001`974e7028===============================================================================
    Common Platform Error Record @ ffffe001974e7028
    Record Id     : 01d0f55a885dc611
    Severity      : Fatal (1)
    Length        : 928
    Creator       : Microsoft
    Notify Type   : Machine Check Exception
    Timestamp     : 9/22/2015 17:40:46 (UTC)
    Flags         : 0x00000000
    Section 0     : Processor Generic
    Descriptor    @ ffffe001974e70a8
    Section       @ ffffe001974e7180
    Offset        : 344
    Length        : 192
    Flags         : 0x00000001 Primary
    Severity      : Fatal
    Proc. Type    : x86/x64
    Instr. Set    : x64
    Error Type    : Micro-Architectural Error
    Flags         : 0x00
    CPU Version   : 0x00000000000306c3
    Processor ID  : 0x0000000000000007
    Section 1     : x86/x64 Processor Specific
    Descriptor    @ ffffe001974e70f0
    Section       @ ffffe001974e7240
    Offset        : 536
    Length        : 128
    Flags         : 0x00000000
    Severity      : Fatal
    Local APIC Id : 0x0000000000000007
    CPU Id        : c3 06 03 00 00 08 10 07 - bf fb fa 7f ff fb eb bf
                    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
                    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
    Proc. Info 0  @ ffffe001974e7240
    Section 2     : x86/x64 MCA
    Descriptor    @ ffffe001974e7138
    Section       @ ffffe001974e72c0
    Offset        : 664
    Length        : 264
    Flags         : 0x00000000
    Severity      : Fatal
    Error         : Internal timer (Proc 7 Bank 4)
      Status      : 0xbe00000000800400
      Address     : 0x00007ffc4894d9e8
      Misc.       : 0x00007ffc4894d9e8
    I tried analyzing the other dump files but they were severely corrupted . Only the recent most dump file gave some information. As per the dump there was an Internal Timer Error which caused the system to crash.

    Below is a list of 3rd party drivers present on your system -
    **************************Tue Sep 22 23:10:46.576 2015 (UTC + 5:30)**************************
    AsIO.sys                    Wed Aug 22 15:24:47 2012 (5034AC67)
    speedfan.sys                Sun Dec 30 02:29:35 2012 (50DF59B7)
    TeeDriverx64.sys            Wed Sep 24 01:31:14 2014 (5421D18A)
    e1i63x64.sys                Fri Mar 27 01:54:57 2015 (55146B19)
    nvhda64v.sys                Fri Apr 17 00:33:16 2015 (55300774)
    RTCore64.sys                Fri Apr 24 12:31:47 2015 (5539EA5B)
    RTKVHD64.sys                Tue Jun 16 16:25:05 2015 (55800089)
    intelppm.sys                Fri Jul 10 08:42:59 2015 (559F383B)
    NvStreamKms.sys             Sat Jul 25 14:52:15 2015 (55B35547)
    nvvad64v.sys                Mon Aug 10 13:21:42 2015 (55C8580E)
    nvlddmkm.sys                Tue Aug 25 19:11:50 2015 (55DC709E)
    **************************Thu Sep  3 20:20:13.510 2015 (UTC + 5:30)**************************
    X6va060                     Thu Aug  6 12:27:21 2015 (55C30551)
    nvlddmkm.sys                Fri Aug  7 08:49:41 2015 (55C423CD)
    X6va060 - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

    Kindly follow the below steps -
    1. Kindly remove the ASUS Bloatware (ASUS PCProbe Utility) since ASUS bloatware is known to cause problems.
    2. Make sure that you are not overclocking. In case you are overclocking, kindly reset everything to STOCK settings.
    3. This appears to be a hardware problem. Kindly run the Prime95 test as per the below guide and report back the results -

      Prime95 download site:
      Prime95 Setup:
      - extract the contents of the zip file to a location of your choice
      - double click on the executable file
      - select "Just stress testing"
      - select the "Blend" test. If you've already run MemTest overnight please run the "Small FFTs" test instead. (run all 3 if you find a problem and note how long it takes to error out with each)
      - "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
      The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
      Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
      Monitor the CPU temperature and DON'T let it exceed 85บC. If it does, then you probably have a CPU cooling problem.
      - CPU temps exceeding 60บC can cause errors in Prime95. Fix the cooling solution first, then run Prime95 again.
      This won't necessarily crash the system - but check the output in the test window for errors.
      The Test selection box and the stress.txt file describes what components that the program stresses.
      NOTE: Errors should be considered when:
      - the system BSOD's during Prime95
      - the system freezes during Prime95 (this is different than the extreme slowness caused by the program using all your RAM and CPU)
      - the Prime95 program crashes
      - the Prime95 program shows errors in it's display
      - there are errors in the Prime95 results file
      More details on the use of this test: http://www.playtool.com/pages/prime95/prime95.html

    Let me know how it goes ^_^

      My System SpecsSystem Spec


Similar Threads
Thread Forum
BSOD caused by ntoskrnl.exe
Hello! I have recurring blue screens on my laptop and can't seem to figure out what's causing them. Sometimes, the computer also freezes completely without any forewarning and the only way to shut it down is to remoce the battery. I should...
BSOD Crashes and Debugging
Solved BSOD - ntoskrnl.exe & ntkrnlmp.exe
Hi all! I've just encountered this BSOD and I tried to analyze it myself using WhoCrashed. It tells me that it was probably caused by ntoskrnl.exe & ntkrnlmp.exe. I've looked into it but I haven't been able to find a fix to this and I was wondering...
BSOD Crashes and Debugging
BSOD when gaming and not gaming
BSOD persists after fresh install of Windows 10 from windows 8.1, happens when playing heroes of the storm quite often but has happened while browsing pinterest/facebook.
BSOD Crashes and Debugging
BSOD driver_power_state_failure due to ntoskrnl.exe
Getting this error randomly in both win8.1 as well as in win10 (ver10.0.10240.16384). Also every time just before this BOSD appears my touchpad and touchscreen both stop responding but computer still works fine with optical mouse attached. Due to...
BSOD Crashes and Debugging
Solved BSOD in ntoskrnl.exe
This is the most recent BSOD. I have no idea on what is causing the problem. I dont know if it's a chipset driver, graphics card issue, sound card issue, or an on the mainboard component that is causing the issue. This morning I was rendering a...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

ฉ Designer Media Ltd
All times are GMT -5. The time now is 13:44.
Find Us
Twitter Facebook Google+

Windows 10 Forums