The last upload included 6 dump files dated 8/23. 5 of the 6 stated
Code:
Use !analyze -v to get detailed debugging information.
BugCheck 1A, {3f, f6ac5, 3bc404c0, da68a739}
Probably caused by : memory_corruption ( nt!MiValidatePagefilePageHash+285 )
Followup: MachineOwner
The other one stated
Code:
MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 000000000000003f, The subtype of the bugcheck.
Arg2: 00000000000035d8
Arg3: 00000000d43b000d
Arg4: 0000000077773860
Debugging Details:
---------
Please Run Memtest86+
Information
Please download from this site only
http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip
Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask.
It is a long test and should take you around 9-10 hours to run it. It requires a minimum of 8 complete passes unless you get an error. If you see an error, you can stop the test. Even 1 error is a fail. You can start it at night and let it run over night.