Hello, ACrandall. I will try to help you. I have looked over about the last 6 dumps. This is what they say.
Code:
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: ffffe0006ad5b028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000be000000, High order 32-bits of the MCi_STATUS value.
Arg4: 000000000008117a, Low order 32-bits of the MCi_STATUS value.
IMAGE_VERSION:
FAILURE_BUCKET_ID: 0x124_GenuineIntel_MEMORY__UNKNOWN
BUCKET_ID: 0x124_GenuineIntel_MEMORY__UNKNOWN
PRIMARY_PROBLEM_CLASS: 0x124_GenuineIntel_MEMORY__UNKNOWN
All of your dumps that I looked at are an 0X124 stop code. That means a piece of hardware is failing/has failed or that a driver is causing a piece of hardware to act as though it is failing. But, rarely does it give us a hint. About half of your dumps mention 'Unknown Memory'.
Please go to your last post and in the bottom left corner click 'My System Specs'. there is a link there to update your system specs, click it and fill them all out in as much detail as possible. Please list Manufacturer and Model, and list Desktop or Laptop. If it is an OEM, please list the Manufacturer and Model number. Please be sure to list your PSU and CPU cooler. If you would like to know what we would like, please click 'My System Specs' at the bottom left of this post and see mine. Your detailed system specs will help us diagnose the problem better.
Your dumps mention memory and memory problems are most important for what I am doing, I need you to run memtest86+.
Please Run Memtest86+
Information
Please download from this site only
http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip
Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask.